Switch 651527-9

Description:

This is a Rocker type switch that has internal terminals. This is a genuine Makita replacement part that is sold individually.

rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows:rn

The tool has completely stopped functioning – it will not start. rn

The tool operates intermittently, requiring multiple tries to turn on, until eventually it won’t start at all.rn

The variable speed function and electric braking aren’t working properly.

Frequently Purchased With

Carbon Brush S..
$10.85

Carbon Brush S..
$7.83

Carbon Brush S..
$10.85

Power Cord (8-..
$21.97

Compatibility

This part is compatible with the following machines:

Expand the 28 compatible machines

Products Compatibility

This item works with the following types of products:

• Router
• Sander

Repair Instructions: Submitted by Customers Like You

2 of 2 people found this instruction helpful

Tool Type:

Sander

Parts Used:

Switch - 651527-9

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Power Drill

Switch was broken

Took the sander apart
Remove the switch
Exchanged wires from the old switch to the new switch
Placed switch
Put the housings together

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Sander

Parts Used:

Switch - 651527-9

Dust Bag - 166027-1

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Philip screwdriver and small flat head screwdriver

Power on off switch was malfunctioning.

I removed all the screw's from the outer body and the four screws to the bottom vibrating plate and then I was able to separate the body to expose the inside of the electrical motor then very carefully I removed the switch and installed the new one and reassembled the sander. I also replaced the dust bag.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Sander

Parts Used:

Switch - 651527-9

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Wrench Set, Air compresser to blow it all out.

Original trigger locked up.

Basically the sanding disc needs to be pulled before you can take the housing apart. Once the sanding disc is removed pull the 4 screws and separate the housing enough to get to the trigger then just switch out the wires and put everything back together in reverse. Don`t forget to blow it out first, lots of saw dust you don`t think about inside.
It works fine now. Good Luck

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Switch - 651527-9

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Electrical tools

Vibrator sander damaged switch!

Opened unit to replace switch and reinstalled brushes and wiring !
Then put housings back together on my Makita sander .
Works perfect!
Thanks to the site.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Switch - 651527-9

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

After many years of service, the on/off switch failed

Took out old switch and installed new switch...easy, peasy.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Brake Ring - 421866-9

Switch - 651527-9

Dust Bag, - 166078-4

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Switch and brake were worn and dust bag torn.

Split the sander apart by removing the screws, made a minor modification to the switch by drilling two holes in the bottom to accommodate the wires (the switch received was for a newer model with different attachment points) which were not long enough to attach to the switch. Installed the switch and reassembled the sander with the new brake.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Switch was not working

Took apart the sander to change the switch.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Brake Ring - 421866-9

Switch - 651527-9

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

switch faulty and coasted to stop instead of stopping

removed pad;cracked case open ;installed switch;installed brake ring;refit case screwed case together;reinstalled pad.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Switch - 651527-9

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Switch stopped working

Removed the top. Took the old switch out. Disconnect the wires and hooked up the switch and put the top back on. Very easy. The part I ordered came quickly,

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Sander

Parts Used:

Switch - 651527-9

Ball Bearing (6000lu) - 039176001012

Dust Shield - 039066010010

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

ryobi sander - bearing; makita sander - switch

Ryobi - remove screws holding bottom plate and replace bearing and dust shield.

Makita - remove screws holding bottom plate. Important - remove screw on each side of plastic piece that centers the motor. Remove the 4 screws that hold the two housing halves together. Unscrew switch terminals to remove wires and insert wires into new switch. On mine, I had to repair the insulation on one of the wires pinched by the housing. If you need to replace the brushes, this would be a good time. Reassemble.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

6 Reviews

Click to filter by ratings:

5 stars

6

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

new switch

it fits and works great

Guest - July 8, 2021 Verified Purchase

good experience

the parts are what i needed. my experience with this company on several occasions has been great

Guest - February 29, 2020 Verified Purchase

Easy to repair

Quick service also shipping was fast. E Replacement parts is the place .

Tod - February 1, 2020 Verified Purchase

Great part, it fit righti

Was a fast delivery.

Guest - January 24, 2020 Verified Purchase

Excellent timely service.

The part arrived very quickly appropriately packaged in good working order.

Guest - January 9, 2020 Verified Purchase

Exact replacement part . Didn’t have to make due with a one size fits all part.

Thought my sander was too old to get parts for. eReplacement Parts had the part I needed in stock, and I got it in two days. Very pleased with the process.

Guest - June 27, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Switch