eReplacementParts.com
877-346-4814
DeWALT Parts
Repair Parts Home  Power Tool Parts  DeWALT Parts  649381-00 Switch

Install
Videos!
Switch - 649381-00:DeWALT 360 View
Switch - 649381-00:DeWALTSwitch - 649381-00:DeWALTSwitch - 649381-00:DeWALT 360 View

Switch 649381-00

Part Number: 649381-00
DeWALT
Availability: In Stock
Price: $39.35
Order within the next 8 hours
and your part ships today!
Product Information
Description:
This genuine DeWalt replacement part is made out of Plastic and is Sold Individually. Switches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement.
Frequently Purchased With
Products Compatibility

This item works with the following types of products:

  • • Drill

Questions & Answers for Switch


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Replace trigger switch.
1. Removed retaining screws.
2. Opened plastic housing.
3. Removed wires.
4. Removed switch.
5. Connected wire to switch.
6. Place switch in housing.
7. Replaced screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, torx screwdriver
Switch wore out
Removed upper drill case, and replaced the switch. Reinstalled upper drill case.
Also replaced the carbon brushes from previously purchased brushes.
If you have the parts, Dewalt drills can't be easier to keep running and eReplacement Parts.com is the go-to place for my Dewalt machine parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Switch went out on drive.
After separating the case. I made a wiring diagram of the switch wires. I then disconnected the wires from the old switch, then connected them to the new switch. Put the case back together and the drill is working great. Thank you
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, torx
variable speed didnt work on the trigger
1) unscrewed torx screws
2) pulled the cover off
3) pulled off leads to trigger
4) tricky part was knowing you have to twist two slots with a small screwdriver to change the power leads.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Variable speed switch would not shut off completly.
I took the screws out of drill body, removed old switch , installed new switch . I put the drill body back together , replaced screws . Works like new ! Thanks !
.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, t-20 torx
no power
replaced trigger switch,unplugged original and replaced new switch exact fit connectors no rewiring needed
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Broken switch
Replaced the bad switch with the new one. Connections were easy and access was also easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, torx driver t-20
3/8 VSR drill ceased working
Split the left and right sides of the drill, leaving all the internals attached to the left side.
The original trigger/switch was held in place by four spade terminals, no fasteners.
I swapped in the new trigger and reassembled the drill, gave it a quick verification test.
It operates normally again.
Job done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
swithc no longer worked
disassembled drill
removed old swithc
replaced with new switch
re-assembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Switch - 649381-00
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Power Drill
Drill stopped working.
Removed and replaced the VSR switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.7
Average Rating (out of 5):
9 Reviews
Click to filter by ratings:
5 stars
6
4 stars
3
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Worked fine
    What else can I say? I have my drill back
    Guest - December 2, 2023 Verified Purchase
    The exactly part we needed.
    Is the same part we needed.
    hector - September 8, 2022 Verified Purchase
    Right part, fit right in without any problem
    Was a switch for drill, brand new original product THANK YOU FOR YOUR SERVICE.
    Guest - March 26, 2022 Verified Purchase
    Very easy repair and correct part, fast shipping. Recommend Ereplacement Parts.
    Part was a drop in replacement for my VSR drill switch. Easy repair to make and worth the time to complete the repair.
    Guest - March 6, 2021 Verified Purchase
    10 min repair job
    exact fit part easy to install unplug old switch plug in new new one ,all connectors were exact fit. I think it was a t-20 torx to remove drill cover
    Guest - November 12, 2019 Verified Purchase
    Saved my drill
    Easy repair as part was direct replacement. Old trigger would start and stop intermittently. Once replaced the drill works like new. Saved $80 by not needing to buy a new drill. Shipping was fast and I was kept informed from purchase to out the door of warehouse and estimated arrival date. Great service and company.
    Guest - August 22, 2019 Verified Purchase
    repair
    switch work great been without drill for awhile shopped around other sites and they wanted 10.00 more than yall so took a chance with you and not disappointed. since i have order piston rings for leaf blower
    Guest - February 11, 2020 Verified Purchase
    Second part on the list was the one I needed and worked perfict.
    The switch arrived when they said it would and it went in and worked like it should the first time.
    Guest - November 28, 2019 Verified Purchase
    Quick delivery fix
    Needed new switch for my power drill. Wrong switch arrived. One phone call and correct switch arrived couple days later. Sales people very helpful and pleasant to work with.
    Guest - October 9, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal