Medium
15-30 minutes
This is a Genuine Manufacturer Sourced replacement part used on Makita Sanders. This switch has a Plastic Body and Trigger. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.
To replace this switch you would need a Screwdriver.
• First make sure the tools is not plugged in
• Then you want to remove Screws used to hold two pieces of Housing Set together
• Disconnect Wires from the old Switch and remove it from the Housing
• Place the new Switch in the Housing and connect Wires to it
• Reassembly the Housing
Switch 651285-7
OEM part for: Makita
Part Number: 651285-7
$14.14
In Stock
Order within the next 10 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
Makita
9911 Belt Sander View Diagrams & Manuals
9910 Belt Sander View Diagrams & Manuals
GV5010 5" Disc Sander View Diagrams & Manuals
9910X Sander View Diagrams & Manuals
This item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Was unable to lock the switch on
dale - February 3, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove housing screws to expose switch, detach wires from switch one at a time and replace them on the new switch in the same place, reverse process to install new switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool got flooded
Robert - January 8, 2024
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Large pliers
1 test motor windings
2 test switch
3 clean motor armature
4 replace brushes holders
5 replace brushes
6 replace switch
2 test switch
3 clean motor armature
4 replace brushes holders
5 replace brushes
6 replace switch
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
