Product Information
Description:
This is a genuine OEM sourced replacement switch box designed for use with drill presses. It is sourced from original manufacturer. It helps to protect the house and secure the switch to the unit. This switch box is made out of black plastic and it is sold individually. Please note the switch and the hardware are sold separately. To complete this repair you will need a screwdriver. • Make sure unit is unplugged • First you want to remove the two screws that are holding the switch plate • Disconnect the wires on the back of the switch • This will allow you to remove the switch plate • Remove the wires out of the old switch box and removing it • Then you want to secure the new switch box in place • Attach switch box with the 2 screws • Reconnect the wires to the switch • Secure the switch plate • Plug in the tool and test it |
No Longer Available:
Unfortunately, this part isn't available any more at eReplacementParts. This could be because:
- The manufacturer doesn't make this part any more
- There are no substitute parts made by the manufacturer to replace this part
- There is no longer any way for us to find this part and stock it in our warehouse
We would love to help you find the part you need, but our call center agents will, regrettably, be unable to assist you with tracking it down. However, you may still be able to locate the part you need by trying the following:
- Using a search engine to type your part number and see if other retailers still have this part in stock
- Visiting online stores such as eBay and finding sellers that have this part
- Trying retailers and repair stores in your local area to see if they have the part in their inventory
- Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part
- Reaching out to the manufacturer of your product to see what their recommendations are for replacing this part