Watch The
Repair Video
Repair Video
Switch Assembly
Part Number: 104365000000
Order within the next 3 hours
and your part ships today!
Product Information
| Manufacturer: Oster Pro |
| Product Number: 104365000000 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
Description:
| Genuine Oster Pro replacement part, this item is sold individually. It includes two leads with it. The switch to a electric tool is one of the most common replaced parts. Eventually a switch will degrade and not operate any longer. It is advised to order an extra switch to keep on hand. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
on/off switch broken
Watched video on YouTube
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Clipper switch would go off in the middle of cutting.
Took the bottom off and removed the broken part. Attached the 2 screws and replaced the back. It worked on the first try.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
bad switch
easily Two screws to remove the old switch
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, My fingers!
The clippers fell and the switch broke.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Switch and cord burned out.
So I unscrewed the screw that holds the cord and switch assembly. Took it from the main part of clipper unscrewed the switch assembly and then unscrewed the port assembly attached from the clipper and replace with new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Switch was broken and cord was frawed
Just two screws needed to be removed to expose the cord attachment area and the switch. Two more screws and the switch was easily replaced. Total time was less then a half hour
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
Switch and cord broke from being dropped.
Removed switch cover nut with pliers and cover plate with small phillips screwdriver, took a few pics for reference of wire placement. Removed two screws that held wires and removed switch and cord. Reversed that process and repair was finished. Replaced brush and spring assemblies and lubed clippers while on repair bench. Very simple repair and saved around $100 plus downtime.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Adjustable Wrench
The switch had broken off at the stem. The cord was also showing signs of fraying.
Unscrewed the bottom of the clippers,removed the power cord and unscrewed what was left of the original switch. I then reassembled the parts according to the photo I had taken before I started. The most difficult part was removing the the rubber stopper that held the power cord in place. Other than that it was an easy repair. My clippers are like new again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Would not stay on. Intermittently shutting off.
Removed end of clippers with phillips head screwdriver. Removed switch, installed new switch. Installed switch nut on the outer side. Reassembled, tested on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Switch broke and just replaced cord
Just replaced parts with a screw driver. It took about ten minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
7 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Easy repair restored use
Broke the arm toggle on/off switch on old appliance. Found the part from online appliance diagram and matched it here on ereplacementparts.com. Part came quickly and was exact match. Wonderful!!
Guest -
September 2, 2022
Verified Purchase
Good part, eazy install
Part was backordered, was offered a refund. Decided to wait on arrival. Company updated artival time line as it becsme available. Glad i waited.
Anonymous -
May 24, 2022
Verified Purchase
Clipper switch
I am glad I found your web site. I was having a hard time finding the switch. The parts picture on the clippers was great. I knew it was the part I needed. I recieved the parts very quickly.
Guest -
April 16, 2021
Verified Purchase
Fit perfectly
Great replacement for my clippers. Remember to keep old hardware( bolts screws, contact points from old parts
Guest -
November 17, 2020
Verified Purchase
Easy Repair
Just what I needed to repair the clippers. Repair Described by seller, swift delivery, fair price. Buy and feel comfortable.
Guest -
October 27, 2020
Verified Purchase
The exact part that I needed
The part I ordered arrived in perfect condition, was shipped timely and in good condition. Thank You. I will order from you again.
Guest -
May 8, 2019
Verified Purchase
Part okay but missing nut
You will need the nut that goes with this switch to replace it. I am surprised it was not with the switch
Guest -
May 20, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
| Manufacturer: Oster Pro |
| Product Number: 104365000000 |
| Classification: Part |
| Weight: 0.01 lbs. |
| Shipping: Ships Worldwide |
