Medium
Less than 15 minutes
This is a genuine OEM sourced part which is specially designed for use with Ridgid drills. This chuck is used to secure a drill bit. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. This high-quality 1/2 inch chuck is made of durable materials and is sold as an individual item. Please note, the screw to secure the chuck is sold separately.
Drill Chuck 680301011
OEM part for: Ridgid
Part Number: 680301011
$40.93
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- 1/2 inch Steel
- Classification: Part
- Weight: 0.59 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 16 machines
Ridgid
R7110 1/2" Drill View Diagrams & Manuals
R830153 Cordless Drill-Driver View Diagrams & Manuals
R8411503 18V Cordless Hammer Drill View Diagrams & Manuals
R851150 Cordless Hammer Drill View Diagrams & Manuals
R82015 (After G0343) 12V 2 Max HC Speed Cordless Drill / Driver View Diagrams & Manuals
R83015 (after G0343) 14.4V Max HC 2 Speed Cordless Drill / Driver View Diagrams & Manuals
R83015 (before G0343) 14.4V Max HC 2 Speed Cordless Drill / Driver View Diagrams & Manuals
R84015 (after G0304) 18V Max HC 2 Speed Cordless Drill / Driver View Diagrams & Manuals
R84015 (before G0304) 18V Max HC 2 Speed Cordless Drill / Driver View Diagrams & Manuals
R8411501 Cordless Drill View Diagrams & Manuals
R8411511 Cordless Drill View Diagrams & Manuals
R82015 (before G0343) 12V 2 Max HC Cordless Drill / Driver View Diagrams & Manuals
R84015 (After G0343) 18.0 Volt Max Hc 2 Speed Drill / Driver View Diagrams & Manuals
R84015 (Prior To G0343) 18.0 Volt Max Hc 2 Speed Drill / Driver View Diagrams & Manuals
R82015 (Prior G0343) 12 Volt 2 Max Hc Speed Drill / Driver View Diagrams & Manuals
R82015 R82015 12 Volt 2 Max Hc Speed Drill / Driver Prior To G0343 View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Drill Parts
- Cordless Drill Parts
- Hammer Drill Parts
This part replaces obsolete part #: 680058002, 680301008, 680301006
Repair Videos ?
Articles:
|
This article explains steps for how to remove threaded-on chucks and taper-fit drill chucks, as well as steps for removi...
September 18, 2009
|
|
Broken gearboxes and sticky chuck screws can make removing a drill chuck difficult. This article explains the tricks you...
August 12, 2010
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Drill Chuck
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Chuck was worn
Chris - September 28, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen wrench, hammer
Parts Used
1. Removed chuck screw w/screwdriver. (note: reverse thread screw)
2. Removed old chuck w/allen wrench inserted.
3. Tapped allen wrench, which loosened old chuck, removed old chuck.
4. Install new chuck by performing steps 3.,2.,1.
2. Removed old chuck w/allen wrench inserted.
3. Tapped allen wrench, which loosened old chuck, removed old chuck.
4. Install new chuck by performing steps 3.,2.,1.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chuck wouldn't hold bit
Brad - October 9, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Drill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Hammer, Allen wrench
Parts Used
I found your video on how to remove the a drill chuck. Here is the link to it, if you need it.
https://www.youtube.com/watch?v=usC8unA5RiA
https://www.youtube.com/watch?v=usC8unA5RiA
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Drill chuck would not stay tight on bits
Dennis - July 2, 2018
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Vice and allen wrench
Parts Used
Got on You Tube found replacement instructions quit easy undo screw in bottom of chuck backwards thread . Take a large allen wrench tighten down in chuck. Place drill in vice to hold hit allen wrench with dead blow hammer and get to untighten screw off then screw back on new one put back in screw in bottom of chuck go to work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chuck got old
Victor - November 30, 2017
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen wrench,hammer
Remove the screw from the middle of chuck
Install allen wrench in chuck
Hit with hammer to loosen chuck
Install new chuck
Install screw
Install allen wrench in chuck
Hit with hammer to loosen chuck
Install new chuck
Install screw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
This was a replacement chuck for a Ridgid hammer drill.
Edward - April 25, 2016
Tool Type
Cordless Drill
Difficulty
Hard
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I watch the video on the Repair Center on your site on How to Remove a Drill Chuck. And I had the drill up and running in no time. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
