Easy
Less than 15 minutes
OEM Rolled Stainless Steel Emitter is sold individually. This is the emitter tray only designed to be paired with a cast iron cooking grate part 80021355. Dimensions are approx. 18-1/4 X 8-7/8" Part is 5/8" Thick. If the part is heavily rusted or damaged it needs to be replaced.
Stainless Steel Infrared Emitt 80021356
OEM part for: Char-Broil
Part Number: 80021356
$27.40
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- This part is for a Case Q Grate.
- Classification: Part
- Weight: 1.77 lbs.
- Also Known As: Emitter Grate
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 10 machines
Char-Broil
463241014 2-Burner Commercial T-22D View Diagrams & Manuals
463241314 3-Burner Commercial T-36D Grill View Diagrams & Manuals
463241013 2-Burner T-22D Gas Grill View Diagrams & Manuals
463241313 3-Burner T-36D Gas Grill View Diagrams & Manuals
466241013 Commercial Grill View Diagrams & Manuals
466241014 Infrared Dual Fuel Commercial Series View Diagrams & Manuals
466241313 Commercial Grill View Diagrams & Manuals
466241314 Commercial Series Infrared Dual Fuel Lidded Side View Diagrams & Manuals
466242014 Infrared Ng Gas Grill Commercial Series View Diagrams & Manuals
466242314 Commercial Series Infrared Ng Gas Grill Lidded Sideburners View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
This part replaces obsolete part #: 80021315
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
53
4 stars
4
3 stars
1
2 stars
1
1 stars
0
< PREV
- 1
- 2
- 3
Working as it should
Just right
Guest -
6 days ago
Verified Purchase
easy replacement
new condition, promptly shipped
Guest -
June 16, 2023
Verified Purchase
Easy fix!!!
Arrives qquickly and easy to replace!!
Mack -
May 24, 2023
Verified Purchase
Grill emitter
Found the product I needed quickly, got it ordered and it arrived pretty quickly. Will definitely use you guys again.
Guest -
May 9, 2023
Verified Purchase
Just what I needed
Replacement was easy and grill works as it did when new. This one component saved the cost of grill replacement
Guest -
January 13, 2023
Verified Purchase
Old barbeque has been revived!
Our 10 year old barbeque has another 10 after receiving the parts... very happy!
Guest -
September 7, 2022
Verified Purchase
Infrared Emitter
It came nice and quick works great in the grill
Dawn -
June 14, 2022
Verified Purchase
grill parts
great service right parts.
Guest -
May 26, 2022
Verified Purchase
Grill replacement on Charbroil
Grill replacement was a duplicate of the original. Good delivery time and packing.
Guest -
May 13, 2022
Verified Purchase
Easy to fix, and parts seem to be great quality
They arrived quickly, seemed to be brand new. Swapping to the new parts was super easy and it's like having a brand new grill.
Jessica -
April 6, 2022
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Stainless Steel Infrared Emitt
I am ordering emitter part number for the above Charbroil grill. Do I need to order 2 or are there 2 in a box?
Bryan
for model number 463241013
asked on 2023-05-07
Hello Bryan, Thank you for your inquiry. We show that these are sold individually. We hope this helps.
eReplacementParts Team May 07, 2023
Where do i find the model number on the 2 burner charbroil infra red grill
Joe
asked on 2023-02-28
Hello Joe, Thank you for your inquiry. The model number can be located in different places on your grill, depending on the model. It is often located inside the grill, on a small white label on one of the legs of the grill, on the base plate, behind the doors or on the back of the grill. In any case, the model number is written in field B on the large silver-grey label and usually starts with 468. You will also find the model number on the packaging of the grill. We hope this helps.
eReplacementParts Team February 28, 2023
replacement Emitter panels for this model #?
David
for model number 463247311
asked on 2022-10-30
Hello David, Thank you for your inquiry. We have researched the model you have provided and have found the part you are looking for is 3485532. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team October 30, 2022
Is the infrared emitter 2 pieces or 1
Brad
for model number 463241014
asked on 2022-10-11
Hello Brad, Thank you for the question. The Stainless Steel Infrared Emitter is sold individually. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team October 11, 2022
I have a 4 burner professional. The grates are 2 pieces each. Will these grates fit mine.
Daniel
for model number 4 burner professional
asked on 2022-02-17
Hi Daniel,
Thank you for your question. Before we can verify if the grates will work on your grill, we will need the model number from it. The model number may be found inside the grill, on the base plate, behind the doors, or on back of the grill. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!
eReplacementParts Team February 17, 2022
Greetings. Do you have an replacement infrared emitter for Char Broil model number 463644220? Thank you.
Mark J.
for model number 463644220
asked on 2022-02-14
Hello Mark, Thank you for your inquiry. We have researched the model number you have provided and show the infrared emitters for your model as part# G362-2100-W1. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team February 14, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Emitter grille rusted out
William - March 27, 2017
👍 36 of 38 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
1. Remove main grill.
2. Remove emitter grill.
3. Install new emitter grilles. Note that even though the replacement emitter grill is stainless (like the newer Charbroil Infrared models), it has not been redesigned so that the holes will be on top of the emitter as in newer grills. No problem, the emitter can be flipped. The end channel pieces are open on the bottom (installed the original way) and if you flip them, the open area can be covered with a strip of aluminum duct tape (the kind used in A/C ducts, not the fabric duct tape). It will keep grease, etc out.
If you watch the Charbroil Infrared YouTube video that explains how infrared works you will see the "holes up" emitter in action and it's ability to prevent flare ups. Duh, "holes down" funnels grease to the burner!
My experience was amazing. Even cooking, no flareup, no hole clogging and easy cleanup.
You will think you have a new model grill.
4. The grill manual shows the need to overlap the flat side edges. The replacement edges are curved and will nest fine in the flipped mode and actually lock together.
5. Replace main grills. If you line main grill ribs over holes, they will get hotter. If you line up so the holes are visible, you will get serious grill marks.
2. Remove emitter grill.
3. Install new emitter grilles. Note that even though the replacement emitter grill is stainless (like the newer Charbroil Infrared models), it has not been redesigned so that the holes will be on top of the emitter as in newer grills. No problem, the emitter can be flipped. The end channel pieces are open on the bottom (installed the original way) and if you flip them, the open area can be covered with a strip of aluminum duct tape (the kind used in A/C ducts, not the fabric duct tape). It will keep grease, etc out.
If you watch the Charbroil Infrared YouTube video that explains how infrared works you will see the "holes up" emitter in action and it's ability to prevent flare ups. Duh, "holes down" funnels grease to the burner!
My experience was amazing. Even cooking, no flareup, no hole clogging and easy cleanup.
You will think you have a new model grill.
4. The grill manual shows the need to overlap the flat side edges. The replacement edges are curved and will nest fine in the flipped mode and actually lock together.
5. Replace main grills. If you line main grill ribs over holes, they will get hotter. If you line up so the holes are visible, you will get serious grill marks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The emitter was worn and had holes and the grate was worn and needed replaced
Bruce - April 27, 2016
👍 7 of 8 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, None
All you need to do is remove them by hand, then replace them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rusted out parts
Russell - February 12, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed all of the parts by hand, then installed the new parts by hand
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Emitters wore out.
Steven - July 12, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Replaced the old with the new. Very easy to do. No tools needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts were simply worn out.
Michael - February 8, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
I removed the old burner tubes, attached the igniters to the new ones, connected the flame carryover. Tested
The grill and installed Flame tamers. Put in the new infrared plates
and laid down grates.
The grill and installed Flame tamers. Put in the new infrared plates
and laid down grates.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old parts rusted
Brian - September 20, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hands
Parts Used
Removed the old emitters
Installed the new ones
Installed the new ones
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The grates had rusted/burned through, and didn't cook well anymore.
Lawrence - September 7, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Drill and 1/8 inch bit.
Parts Used
I removed the top cast iron coated grill plates.
Removed old grill grates.
I put in the new grates, but with the ribs with the holes up instead of down.
This made the temperature seem lower on the temperature gages, but was actually much hotter at the grill surface. The grill marks are much more defined and the burgers/kalby grills much faster. I did drill holes at the back of the grate channels to allow the grease to drip through. If you don't drill the holes the grease will fill up and smoke a lot.
Finally replaced the cast iron top coated grill plates.
You can install with the ribs with holes down, but it will take longer to grill.
Removed old grill grates.
I put in the new grates, but with the ribs with the holes up instead of down.
This made the temperature seem lower on the temperature gages, but was actually much hotter at the grill surface. The grill marks are much more defined and the burgers/kalby grills much faster. I did drill holes at the back of the grate channels to allow the grease to drip through. If you don't drill the holes the grease will fill up and smoke a lot.
Finally replaced the cast iron top coated grill plates.
You can install with the ribs with holes down, but it will take longer to grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Emitter trays were rusted through
Thomas - July 30, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, My hands
Parts Used
Take out old. Put in new. Even I did not mess this one up!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original emitters degraded due to heat over several years
Henry - July 30, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Simply lifted out old parts and dropped in new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Steve - July 30, 2018
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, None required
Parts Used
Lift out the old worn out emitters, and insert the new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
