This is an original part from Husqvarna, Poulan, and Jonsered for use with Lawn Tractors. The mandrel shaft assembly rotates the blade under the mower deck. The mandrel shaft assembly includes the shaft and the bearing. The most common reason for replacing the spindle assembly is when the mower blades won't spin or they are very loud during operation. This part is sold individually. The tools that you will need to replace the mandrel shaft assembly are a 7/8 inch socket on an impact driver, 5/8 inch socket and a -+ inch socket.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
easy and fast
the part arrived in 3 days was a perfect fit and made repair easy
Guest - August 7, 2021
Verified Purchase
★★★★★
★★★★★
Just what I needed.
I have used this site for parts often and have never been disappointed. Always the right part and at a good price. The diagrams from the manufacturers' manual make it so easy to order.
Guest - September 14, 2021
Verified Purchase
★★★★★
★★★★★
ordered wrong part
Overall length was not easily recognized on the prints. returned part
Guest - June 21, 2021
Verified Purchase
June 21, 2021
Hello, Thank you for leaving a review on the Mandrel Spindle Shaft Assembly. Checking the order we am showing you have already contacted us to address the issue. Please let us know if there is anything else we can assist you with.
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Replaced both coils and charged up battery.
2. Belts dry rotted; replace belts
3. Safety switches inoperative; bypassed to start machine
4. Deck in bad shape; needs sand blasting and welding, painting afterward
5. Replaced all blades, most were bent, pulleys all rusted, sand papered.
6. Reassembled a
... Read morell parts and tested lawn mower.
7. The deck was difficult to reassemble and remount on bottom of mower, no special tools required.
Read less
Did you find this story helpful?
Thank you for voting!
The Star at the end of my shaft assembly and the bolt that holds the blade was worn and needed to replaced
Dropped the deck, removed the belt, bolt and Pulley from the top of the Mandel, removed the bolt and blade from the bottom of the Mandel. Then remove the bolts holding the mandrel to the deck and drop the mandrel. Next the shaft was removed but the bottom bearings would not release from the mandrel. I stuck the handle of a socket wrench
... Read more thru the top of the mandrel and hammered the bearing out. I cleaned the mandrel and installed the new shaft assembly and assembled the other parts in reverse.
Removed tower from mower deck replaced mandrel put tower back on mower deck and installed spacer lower pulley upper pulley then tightened nut on top of mandrel
Removed deck,blades, and nuts holding spindles tapped out old bearings put in new parts reinstalled blades and put deck back on lawn tractor cleaned everything and lubed it before i put it back together
Removed belts. Unbolted spindles. Used rubber mallet to pound out bearings. When parts arrived I installed the bearings and bolted everything back together. Waiting for idler pulley. Then it will be done.
Remove mower deck from mower tractor.
Remove damaged spindle assembly and pulley
Remove cutting blade from bottom of spindle
Install cutting blade to bottom of new spindle
Install new spindle and new pulley.
Attach belt by loosening tension pulley
Re- install mower deck.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9010131
Manufacturer Part Number: 532137553
Lawn Mower
- Husqvarna Lawn Mower Model 4186-74 (418674, 4186 74) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/parts/lawn-and-garden/lawn-tractor/wheels-and-rollers/"},{"position":2,"name":"532137553","title":"532137553","url":""}]
