866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Appliance Parts  Presto Parts  09936 Sealing Ring Assembly

Sealing Ring Assembly

Part Number: 09936
Presto
Availability: 25+ in stock
Price: $11.40
Quantity:
Ships within 1 business day
Specifications
  • OD: 10-5/8 Inches
  • ID: 9-5/8 Inches
Description:
This is a genuine Presto replacement part, it is sold individually.
The purpose of the 09936 Pressure Cooker Sealing Ring/Overpressure Plug Pack is two-fold.
The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot.
In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.
Product Information
Manufacturer: Presto
Product Number: 09936
Classification: Part
Weight: 0.13 lbs.
Shipping: Ships Worldwide
Repair Guides
Watch the Repair Video for Sealing Ring Assembly
How to Replace the Sealing Ring on a Presto Pressure Cooker
Articles:
How to Replace the Sealing Ring on a Presto Pressure Cooker
Step-by-step instructions for removing and installing the sealing ring and plug on your Presto pressure cooker....
September 01, 2017
Compatibility

This part is compatible with the following machines:


Products Compatibility

This item works with the following types of products:

  • • Range
Questions & Answers

I need a sealing ring for a 6 quart Presto pressure cooker model #01362. Can you help me?
carolyn for model number 01362
Hello Carolyn, thank you for your inquiry! The correct sealing ring for model 01362 is part number 09936. I hope this information helps!
Presto stainless steel pressure cooker model # 0135004. I need a gasket maybe called a sealing ring for the lid. This is an older cooker around 30 yrs. I do not know how many quarts. Would you please tell me the part # for the seal, do you sell it and the cost. Thank you. Ina Skinner
Ina for model number 0135004
Hello Ina, Thank you for contacting us. I have researched the model you have provided and have found the part you?re looking for is Part Number: 09936. Hope this helps, good luck with this repair!
Do you have ring for this model? how much does it cost. we are at Batesville Ms.
bharti for model number 0135001
Hello Bharti, Thank you for contacting us. I have researched the model you have provided and have found the part you?re looking for is Part Number: 09936. The current price is $11.40 plus shipping. Hope this helps, good luck with this repair!
I am so confused on the seal I need. Under the handle are two numbers. I need a seal for my canner. Thanks for your help.
Laura Wing for model number 0178107 / 49083G3
Hi Laura, Thank you for your question. 0178107 is the model number for your pressure cooker. The part number listed under your model number for the sealing ring is 09985. I hope this helps. Thank you and have a great day!
Hello, I know this pressure cooker is very old , but i need to change the gasket and the regulator, pls help me to find the correct parts. Thanks for your attention/Olga
Olga Sanchez for model number MOD#: A403A^ 4374
Hello Olga, thank you for your inquiry! For your model A403A, the correct sealing ring is part number 09909. The regulator is part number 09978. I hope this information helps!
I need a new sealing ring and the rubber gasket replaced in my lid. Which one fits my cooker.
Elizabeth Holmes for model number Mod 01/PA4
Hi Elizabeth, Thank you for your question. The part number listed under your model number for the sealing ring assembly is 09903. I hope this helps. Thank you and have a great day!
What's Seal Gasket Part #? What's Upper Handle Part # ?
Huong NGuyen for model number MOD 0135004
Hi Huong, Thank you for your question. The part number listed under your model number for the sealing ring assembly is 09936. The part number for the upper or lid handle is 85312. I hope this helps. Thank you and have a great day!
1970's Gold pressure canner approx: 12" across. I need a new rubber gasket seal, the Pressure gage, and the round pressure rocker (can't remember what it is called) and would loved to have instructions for use. Also need the insert for the jars to set on. The canner itself is in great shape. Could you provide me with information about these items and where I could order them from please?
Janet Moore for model number 01/CA16H4375?
Hello Janet, thank you for your inquiry! The correct sealing ring and air vent is part number 09907. Unfortunately, we do not include replacement instructions with our parts. All information on parts can be found under the link below. https://www.ereplacementparts.com/presto-01ca16h-quart-pressure-canner-parts-c-119101_119102_119119.html
I would like a sealant ring for this pressure cooker top. I believe it is a 6 qt. The top also needs a handle (black would match) can you tell me the part numbers for both of these items?
Ran for model number presto 10D 013 5001
Hello Ran, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 85312 for the cover handle and Part Number: 09936 for the Sealing ring. Thank you for your inquiry, good luck with this repair!
Need a gasket for a Presto Pressure Cooker Part Number 0134001. I cannot find this number listed in any of the parts. Thank you.
Alba for model number 10D . 0134001
Hello Alba, thank you for your inquiry! Gasket for Pressure Cooker Interlock Assembly Part Number: 85660 In Stock, 12 Available $2.99 Sealing Ring Assembly. Part Number: 09936 In Stock, 25+ Available $11.40 I hope this information helps!
What is Seal Part# ? What is Handle Part# ?
Huong Nguyen
Hello Huong, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
I have presto pressure cooker model PCC6. I ordered a sealing ring on Amazon which said it fit, but made in China and is a little small, thus not sealing properly. Do you have the proper size and where can I obtain it?
Joanne for model number PCC6 6 quart
Hello Joanne, thank you for your question. The sealing ring for this unit is Part Number: 09901. Please enter the part number into the site for current price and availability. Good luck with your repair!
I would like to know what number is the sealing ring
Robert for model number 0136203
Hello Robert, thank you for inquiring. This Sealing Ring Assembly is the correct replacement for your model.
I need the seal ring.My lid is 13" in diameter.
Carol Burin for model number Model 0171001 or 0174001.
Hello Carol, thank you for your inquiry! For your model 0171001, the correct sealing ring is a part of the safety plug kit which is part number 09905. I hope this information helps!
Repair Instructions: Submitted by Customers Like You
27 of 29 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Pressure Regulator - 09978
Sealing Ring Assembly - 09936
Pressure Cooker Cooking Rack - 85360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none!
Pressure regulator not softly rociking after (?) 20 years of being used 5 times a week.
The inside of old regulator aluminum weight had deteriorated. Throw old weight in trash place new weight on pressure cooker....should have done it 3 to 5 years ago! Pressure cooker now rocks away with that satisfying slow rocking puff like the day I pulled it out of the shipping box.

After 3 years (?) and approximately 1,000 use cycles the old sealing ring gasket was becoming ever more cantankerous to force into 'one more' use. I work with gaskets at the day job and can just touch a gasket and tell how long it has been in service by how hard it becomes with heat and oxidation. Old gasket removed by hand and placed new lively (resilient) sealing gasket in top of pressure cooker and it seals without drama or extravagant tricks. The new gasket seals up before lid is pushed into locking position! Overpressure plug was nice as the old one was very oxidized and hard and becoming reluctant to pressure seal.

The rack! ...The rack was dark, warped and flange was split from forcing a concave depression into a convex dome. Toss old black and brown in trash, drop new shinny rack into place, Twenty years and well past 1,000 use cycles!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 9 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools
Old rubber seal
Just replaced the old rubber seal
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
The sealing ring was missing and the overpressure needed to be replaced.
Replaced both parts very easily.This was special,was this pressure cooker that belonged to my wife's mother for years. We found it in her old house this summer. My wife was so excited to find it and is very happy that after all these years we could still get the replacement parts . And easy installation of this part has it working like new. Just pull out the old ring and push this new one in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 7 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Pressure Regulator - 09978
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, fingers
Pressure cooker sealing ring was leaking due to several years of use
Easy removal of sealing ring by pulling it out of cover by hand and installing the new ring by pushing it around the cover's interior edge. I also replaced the pressure regulator.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Pressure Canner Gasket - 85659
Pressure Regulator - 09978
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools were needed.
The gasket and plug on my pressure cooker had dried out and did not seal.
Removed the old gasket and plug, and put the new parts in place. The regulator was corroded so I replaced that also. My pressure cooker is at least 20 years old so I was very pleased to be able to replace the pressure regulator and the dried out gasket and plug, and not have to purchase a new pressure cooker.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pressure cooker sealing ring cracked
Cleaned lid and replaced ring and plug
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Pressure Cooker Cover Handle - 85312
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Lost the overpressure plug and the handle was broken.
Removed the handle, replaced the seal and the plug. No problems.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Sealing Ring Assembly - 09936
Pressure Cooker Cover Handle - 85636
Body Handle - 85638
Pressure Cooker Short Handle - 85639
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Dropped pot and broke short handle
Removed all three old handles and replaced with the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Fingers
Parts old and worn out
Removed the old ring and pressure plug. Cleaned the slot where the the ring is placed. Installed the new ring, then installed the new pressure plug.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Sealing Ring Assembly - 09936
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hands
Sealing ring was worn out
Followed the instructions that were included with the part. Easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Perfect fit!
    I lost the pressure relief valve on the ancient pressure cooker my Mom gave me years ago. Had trouble matching it up so called Customer Service and was quickly hooked up with what I needed. Got new seal kit also. Finally got a chance to use it and it works like new! Thanks
    Guest - May 16, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy