Easy
15-30 minutes
This authentic manufacturer-supplied rounded roller is specially made for use with Snapper and Simplicity riding lawn mowers and garden tractors. It is a special component which helps to support the deck. This is an identical replacement for a missing or a damaged part that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. One durable component is included. Keep in mind the hardware to secure it is sold separately.
Roller, Rounded 1722036SM
OEM part for: Snapper, Simplicity
Part Number: 1722036SM
$8.71
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This Roller, Rounded will fit the following 567 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 567 matching models.
567 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Simplicity
- Snapper
This item works with the following types of products:
- Lawn Mower
- Lawn Tractor
This part replaces obsolete part #: 1722036
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Roller, Rounded
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Roller bores worn out
Steven - December 12, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Medium
Time
1-2 hours
Tools Used
Pliers, Power Drill, Wrench Set, Welder and grinder
Parts Used
Remove the shaft that holds all the rollers. This fits on the back of the deck purpose is to keep the back of the deck following the contour of the ground.
After taking it apart I found that eight inches of the shaft were worn. Cut it out and welded a new piece in, fortunately it only had to be done on one side.
Had to drill a new whole for Carter pin that holds the bowler on. I previously did this on both sides because I didn't like the snap-on round clip
After taking it apart I found that eight inches of the shaft were worn. Cut it out and welded a new piece in, fortunately it only had to be done on one side.
Had to drill a new whole for Carter pin that holds the bowler on. I previously did this on both sides because I didn't like the snap-on round clip
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blades dulled, outer roller worn out
Robert - July 19, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Removed the old blades and roller
Installed the new blades and roller, reversing the process.
Installed the new blades and roller, reversing the process.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced grips
James - June 4, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Remove and replace grips with soapy water. Remove the push nut, then remove the old rounded roller. Install the new rounded roller and attach the push nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
ROLLER CAME OFF AND GOT CUT UP.
GARY - August 31, 2020
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, HAMMER FOR PUSH NUT, SAW TO CUT ROLLER TO CORRECT LENGTH
SEE ABOVE. CUT ROLLER TO LENGTH AND SLIDE ON W/WASHER. DRIVE LOCK NUT ON W/ HAMMER.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Roller would not turn, bottom of roller was ground flat when I received the mower.
Mike - July 13, 2017
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Hammer
Parts Used
1. Removed cap on the roller shaft.
2. Cleaned shaft, and lubricated shaft.
3. Replaced new roller, and cap.
2. Cleaned shaft, and lubricated shaft.
3. Replaced new roller, and cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
