This is an original part from Briggs & Stratton. The rocket cover gasket is compatible with many small engines. The cardboard composite gasket is designed to prevent damage to engine parts and absorb fuel leakage. A screwdriver and a wrench may be needed to make the removal and replacement. This part is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.
Removed and cleaned the rocker covers and head, installed new gaskets and reassembled. Spent some time cleaning the heads where the oil had been leaking to make sure the new gaskets were not leaking.
Did you find this story helpful?
Thank you for voting!
Backfiring out of muffler, loss of power, misfires
1. First ran Marvel Mystery Oil through engine to clean up the valve stems if I had sticky valve stems.
2. Then checked valve adjustment, tested compression but then found out this engine has compression release in the valve train so I did a cylinder leak down test which showed good valves and cylinders.(A leak down test uses a s
... Read morepecial gauge that uses a compressed air source of about 90 -100 pounds pressure and meters a specific flow into the cylinder from the spark plug hole while the cylinder is at top dead center and both valves are closed. A gauge then indicates how much air is leaking out of the cylinder. If the gauge indicates your engine has significant leakage you listen to the 3 different areas of the engine to determine where the leakage is occurring. (Crank case at the PCV valve or oil cap which would indicate bad piston rings, Carburetor throat which would indicate bad intake valve, or the muffler exhaust which would indicate a bad exhaust valve) NOTE: Even with a normal indication on the gauge there will always be some air passing the piston rings.
3. Next I removed the Carburetor which was relatively easy.
4. Cleaned carb, blew it out with compressed air.
5. Reassembled carb and installed on engine.
6. Changed oil, plugs, and air filter.
Removed 2 nuts on the valve cover.
Cleaned it carefully
Secured the new gasket to the valve cover with a dab of gasket adhesive.
Tighten nuts. Do not over tighten.
No leaks.
Lawn Mower
- Simplicity Lawn Mower Model 1614H Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/lawn-and-garden/engine/caps-and-lids/"},{"position":2,"name":"806039S","title":"806039S","url":""}]
