How to Replace the Turbo Nozzle on a Ryobi Pressure Washer
The turbo nozzle is a powerful accessory that is used with your pressure washer. The turbo nozzle is a zero-degree nozzle that rotates in a circle so it has a wider cleaning swath. There are a couple common problems that can arise with the turbo nozzle. The nozzle can become clogged, causing little (or no) water to come out. Debris can get into the nozzle and prevent it from rotating. If problems with the turbo nozzle arise, the assembly can be replaced (and the repair is extremely simple).
Let's get started.
REMOVING THE TURBO NOZZLE
1. Remove the turbo nozzle.
a. Pull back the quick-release collar on the coupling.
b. Remove the nozzle from the wand.
INSTALLING THE NEW TURBO NOZZLE
2. Install the turbo nozzle.
a. Apply a small amount of silicone grease to the fitting on the new turbo nozzle.
b. Pull back the quick-release collar on the coupling.
c. Install the new turbo nozzle onto the wand.