How to Replace the Blade on an MK Diamond Tile Saw
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
The diamond blade on your tile saw makes quick and clean cuts in even the hardest of tiles. The blade is designed for long life, but eventually it will wear down, and will need to be replaced. The harder the tile, the faster the blade will wear. The blade can also be damaged or bent. Binding up the blade can damage the diamond surface or bend the blade. Side-grinding with the blade can also cause it to bend.
Let's get started.
REMOVING THE BLADE
1. Remove the blade.
a. Pivot the guard toward the rear of the saw (away from the blade).
b. Engage the blade-lock to prevent the arbor from rotating.
c. Use a wrench to remove the nut securing the blade to the saw.
d. Remove the outer flange.
e. Remove the blade from the saw.
INSTALLING THE NEW BLADE
2. Install the blade.
a. Install the new blade onto the blade shaft.
b. Install the outer flange.
c. Engage the black lock to prevent the shaft from rotating.
d. Secure the blade with the nut.
e. Lower the blade guard.