Jig Saw Repair
The jig saw is used to cut various materials with precision and ease, so when it isn't working properly it can greatly impact the quality of the job at hand. It also works in a very dusty environment, which can lead to the malfunction of certain parts. Our expert repair technicians have come up with the most common symptoms associated with the jig saw and the parts that correlate to the problem. Fix your tool yourself using our repair and troubleshooting guide, saving on time and money.
Blade falls out
Reported 34% of the time
If the blade falls out of your jig saw, check the blade screw, blade clamp, and reciprocating shaft. Once you have the part narrowed down, use our expert repair guide to fix your jig saw yourself. Refer to your owner's manual for advice specific to your model.
Won't cut straight
Reported 18% of the time
The precision of your jig saw is extremely important, so if it isn't cutting straight this can be very frustrating. If this is the case, check the following parts: the base/plate/shoe, guide, blade support, roller, blade clamp, and control bearing. Once you have located the part that is causing the problem, read our repair guide for tips on completing a DIY repair.
Won't turn on
Reported 15% of the time
If your jig saw won't turn on, take a look at the switch, carbon brushes, power cord, cap, armature, field, and brush holder. If you detect that one of these parts might be damaged, read our repair guide for tips on how you can repair your jig saw yourself. Check your owner's manual for advice specific to your model.
Bad vibration
Reported 8% of the time
If your jig saw is experiencing bad vibration, this can really impact the precision of your work. The most common parts that are associated with this problem are the base, guides, bearings, and blade. Once you have figured out which part is causing the issue, read our troubleshooting and repair guide for tips on how to fix it yourself. Refer to your owner's manual for instructions relating to your model.
Base is stuck or won't adjust to make a bevel cut
Reported 7% of the time
If your jig saw base is stuck or won't adjust to make a bevel cut, check the base for damage. This should be a fairly easy repair, and we will help you along the way. Refer to your owner's manual for advice specific to your model.
Blade doesn't reciprocate
Reported 7% of the time
Is the blade not reciprocating on your jig saw? Inspect the shaft, gears, carbon brushes, bearings, and yoke bar for damage. Once you know the part that is causing the issue, read our expert repair advice for tips on how to do your own repair. Reference your owner's manual for detailed instruction.
Excessive sparks from motor
Reported 2% of the time
If you notice excessive sparks coming from the motor, safely inspect the following parts for damage: the carbon brushes, armature, field, and switch. Now that you know the part that is to blame, read on for our repair advice and tips on fixing your jig saw yourself. Always check your owner's manual for information specific to your model.
Grinding or squealing sound
Reported 2% of the time
Hearing grinding or squealing sounds coming from your jig saw may seem concerning, but it is fairly common. Our experts have pinpointed which parts are usually the cause of this issue. Once you have determined the part that needs to be fixed or replaced, review our expert repair advice for tips on completing the project yourself. Refer to your owner's manual for information specific to your model.
