Easy
15-30 minutes
This is an OEM part sourced directly from the manufacturer. Part is sold individually. Does not include the thermal relief valve (678169004) Commonly used in pressure washers, this pump creates a high volume pressure, supplying water through the high pressure hose, to the gun, and out through the pressure wand. This specific pump is only sold as a complete assembly.
Pressure Washer Pump 308653093
OEM part for: Homelite
Part Number: 308653093
$252.15
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Pressure Washer Pump will fit the following 61 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 61 matching models.
Homelite
Show More Compatible Models61 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Homelite
- Husky
- Ryobi
This item works with the following types of products:
- Pressure Washer
This part replaces obsolete part #: AUN31099 (2-21-18 (Rev:01)), 308653078, 308653005, 308653052, 308653003, 308653045, 308653025, 308653006
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
15
4 stars
6
3 stars
1
2 stars
2
1 stars
0
< PREV
- 1
- 2
- 3
easy repair
working great , fit perfectly. thank you
Peter -
July 20, 2023
Verified Purchase
Perfect fit. It arrived fast and great price
Pressure washer pump
Guest -
June 14, 2023
Verified Purchase
Easy repair, works great!
Easy to install. Pump operates flawless.
Guest -
May 22, 2023
Verified Purchase
Pressure washer pump.
Arrived quick. Easy to put on. The only thing I had trouble with was getting the pump on the shaft with the key. A couple light taps with a rubber mallet and was good to go. Clean and lightly lube the shaft and key. Works great. Thanks. I recommend this company for parts.
Guest -
August 21, 2022
Verified Purchase
Another diy success
Replacement pump for a gas powered power washer. Relatively simple to remove and replace. Gas motor has plenty of life left, pump had given up so for 1/3 the cost of a whole new unit I am back up and running.
Guest -
July 3, 2021
Verified Purchase
Every thing went great just like last time
Every thing fit and it is working ok. Thank you
Guest -
June 16, 2021
Verified Purchase
The pump arrived and was an exact duplicate of the original.
Was an easy installation and the pressure washer is working again.
Guest -
June 12, 2021
Verified Purchase
worked as expected
perfect fit no problems installing. quick delivery
Guest -
September 30, 2020
Verified Purchase
Saved money with no hassle replacement
Product was what I expected. No hassle. Website provided easy to follow installation video.
Guest -
June 15, 2020
Verified Purchase
Easy repair
Super easy to fix. I ordered the wrong pump. Return process is easy as well. Super happy!
Guest -
April 6, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Pressure Washer Pump
My problem comes with engine running and you release the control (stop power washing) the connected hose will burst where it is fastened to the power washer.
Ted John Spitaleri
for model number RY802800
asked on 2023-11-28
Hi Ted,
Thank you for your question. It is important that when you are using the pressure washer, that the water temperature is set correctly and that you are using the correct hose for the what you are doing, otherwise it will burst from the pressure washer. If you did not drain the system before using it, the hose may burst from the pressure washer. Also, if the hose is bursting from the pressure washer, it may not have been properly fastened or it maybe old or worn. We hope this helps!
eReplacementParts Team November 28, 2023
After a couple of years of very low usage I noticed a bolt under the pump on the ground. I turned the unit over and it was one of the three bolts holding the lower part of the pump. Tried to reinstall it before noticing it had sheared off and the break is in the middle section and inaccessible. Tried drilling and using an easyout but that broke. Seems the bolt was overtightened during manufacture since I never touched anything on the pump. Any sort of extended warranty on an issue such as this? Regards, Lee
Lee
for model number PS803125
asked on 2022-11-08
Hello lee, Thank you for writing eReplacementparts.com. For warranty issues please contact Homelite. We hope this helps!
eReplacementParts Team November 08, 2022
How much 80/90 oil dose it take in pump
Steven
asked on 2022-04-14
Hello Steven, Thank you for the question. Fill to the bottom of the fill hole. I hope this helps and have a great day.
eReplacementParts Team April 14, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
No water pressure
Joseph - May 3, 2016
👍 26 of 29 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
Follow the your video, very simple, very easy. Local Homelite repair shop
Said repair would cost $250 and take a week to do. My cost less than
$100 and 20 minutes I was back on the job. Many thanks. Kind regards
Joe K.
Said repair would cost $250 and take a week to do. My cost less than
$100 and 20 minutes I was back on the job. Many thanks. Kind regards
Joe K.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pump in pressure washer stopped pumping pressure.
John - February 22, 2016
👍 18 of 19 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Nutdriver, Adjustable Wrench
Parts Used
Unbolted pump from pressure washer and attached new pump. Then pulled pressure relief valve from old pump and attached to new pump. Took 15 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replace pressure pump and thermal relief valve
Craig - March 9, 2016
👍 15 of 16 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Keep power head upright! Remember you should drain the fuel and oil at minimum drain the fuel. Remove the 4 bolts from the pump and drop the pump assy. There is a shaft key make sure you have it on the engine shaft. Align the shaft key to the pump install the four bolts to the bottle of the engine. I fill the pump with a protectant agent them added fuel and pulled the engine start cord until the protectant came out (Note the engine was in the off position). Connected the water supply and started the engine, the unit worked like new! (Note it is important to use a pump protectant after each use and certainly before prolonged storage!)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pump was cracked on my Power Sprayer
Keith - April 26, 2016
👍 10 of 12 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set, None
Parts Used
3 bolts. Remove pump. Lube the shaft. Put on new pump. Put back in 3 bolts. I had to take the thermal relief valve from the old pump and put it on the new pump. Truly easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pump quit pumping had to replace pump
Salvador - October 7, 2016
👍 5 of 5 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set
Parts Used
I had to remove 3 bolts that held the pump to the motor. The pump dropped down and it had a shaft with a key way in the middle. Then, I had to line up the new pump with the motor and secure it at the same time. This was the hardest part of the repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old pump failure
HOWARD - April 23, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Unbolt old pump three bolts detach soap feeder tube replace with new pump. Easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Easy replacement
Carl - June 6, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
Very easy and rather quick repair. Just disconnected everything from the old pump, removed the three bolts that secure it and took it off. Attached the new pump with the same hardware, re-connected the hose.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced pump. Winterized but still froze and cracked the housing.
Andrew - May 27, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Wrench Set
Parts Used
Important to know that when you remove the pump you will need help holding the pump up during the replacement. I found the job to be easy if you placed the pressure washer on a table rather than at ground level. Remove three bolts then remove the old pump. Line the new pump up to the shaft and tighten the three bolts. Remove the thermal relief valve from the old pump and place it on the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pump cracked
George - August 17, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Wrench Set
Removed the three bolts that hold the pump to the engine
Removed the pump
Pushed on the new pump, lining up the key and key way
Tightened the three bolts
Installed the new thermal relief valve
Removed the pump
Pushed on the new pump, lining up the key and key way
Tightened the three bolts
Installed the new thermal relief valve
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pump had no pressure
David - August 9, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Pressure Washer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Pry Bar
Watched video on how to remove pump and install pump. Once received in mail installed with no problem. https://www.youtube.com/watch?v=c_Y9vXATSCg
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
