Power Cord (8-foot) 110738000000
Part Number: 110738000000
Order within the next 13 hours
and your part ships today!
and your part ships today!
Product Information
Specifications
|
Description:
| This is a manufacturer sourced replacement part designed for use with Oster Pro clippers. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. It is made out of rubber and metal. It is sold individually. To replace this cord you will need a screwdriver. |
Frequently Purchased With
Compatibility
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers for Power Cord (8-foot)
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 4 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Cell phone camera
Cord damage usage
Took apart bottom of clipper, cleaned up with nail brush, took photo of original connection then replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
worn cord
replaced worn cord with new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Damaged cord
Certified that the clipper was unplugged
Removed the cord cover
Removed the nuts to remove the cord connection
Cleaned the connection posts
Fed the new cord through the cord cover
Placed the new cord connectors to the posts
Started the connection hold down nuts
Tightened the nuts
Replaced the cord cover
Placed the cover screws and tightened.
Plugged in the clipper/tested
Removed the cord cover
Removed the nuts to remove the cord connection
Cleaned the connection posts
Fed the new cord through the cord cover
Placed the new cord connectors to the posts
Started the connection hold down nuts
Tightened the nuts
Replaced the cord cover
Placed the cover screws and tightened.
Plugged in the clipper/tested
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Cord was thread bare
Unscrewed the end. Vacuumed the hair out. Unscrewed the old cord. Pulled the new cord into place. Screwed it in. Screwed the end on. Voila. Good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Switch was broken and cord was frawed
Just two screws needed to be removed to expose the cord attachment area and the switch. Two more screws and the switch was easily replaced. Total time was less then a half hour
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
Switch and cord broke from being dropped.
Removed switch cover nut with pliers and cover plate with small phillips screwdriver, took a few pics for reference of wire placement. Removed two screws that held wires and removed switch and cord. Reversed that process and repair was finished. Replaced brush and spring assemblies and lubed clippers while on repair bench. Very simple repair and saved around $100 plus downtime.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Adjustable Wrench
The switch had broken off at the stem. The cord was also showing signs of fraying.
Unscrewed the bottom of the clippers,removed the power cord and unscrewed what was left of the original switch. I then reassembled the parts according to the photo I had taken before I started. The most difficult part was removing the the rubber stopper that held the power cord in place. Other than that it was an easy repair. My clippers are like new again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Spot on replacement cord for oster 76’s
Exact replacement cord for oster 76 clippers. Easy instal with the help of a quick YouTube video. Thanks for an awesome product at an awesome price!
Guest -
August 20, 2020
Verified Purchase
Replacement cord
Great fitment fast shipping and a great price!
Guest -
August 14, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
