The Wrench is part of an automatic tool changer on a CNC mill. when the spline socket falls off, you have to take the whole changer apart to put the socket back on.
The old retainer clip was very difficult to remove, there was no room to get anything under it, I wound up having to modify a snap ring pliers to get into the lit
... Read moretle gap in the ring and open it to the point I could get an o-ring hook under it and work it off.
I was able to use the same modified pliers to open the new one to get it on.
I had to grind between the pins on the pliers to allow it to come closer together than normal and grind the outside of the pins flat, so the ring would stay on.
Used thin blade screwdriver to open gap being held with pliers before slipping over the end of the anvil and into place.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of CA092093 Chicago Pneumatic Socket Retainer")
_WW_1.gif "Part Location Diagram of CA092093 Chicago Pneumatic Socket Retainer")
