This high quality Ridgid replacement part is used with wet and dry vacuums. It is an authentic OEM sourced item, not an aftermarket imitation. This toggle switch allows user to turn the unit on and off. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Please note, this plastic item is sold individually.
Troubleshooting
This part works with the following brands:
Ridgid
Homelite
This part works with the following products:
Utility Vacuum
Part# 12313R replaces these:
12313, 47832, 813213, 823871,
★
Customer Part Reviews
?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(55 Reviews)
Click to filter by ratings:
5 stars
50
4 stars
3
3 stars
2
2 stars
0
1 star
0
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
DIY repair that was not available at local store
Easy to order, arrived quickly, and worked perfectly.
Glad I checked your website!
Guest - January 22, 2020
Verified Purchase
★★★★★
★★★★★
part good n correct
Thank you for quick response.
Guest - February 3, 2020
Verified Purchase
★★★★★
★★★★★
replacement switch
Thanks for the quick turn around
Guest - February 18, 2020
Verified Purchase
★★★★★
★★★★★
Part was exactly as stated in the description
Right part, good price. Decent shipping. Word definitely order from here again
Guest - February 28, 2020
Verified Purchase
★★★★★
★★★★★
Just what I needed!
Part arrived fast! Quick replacement and works perfect.
Guest - March 17, 2020
Verified Purchase
★★★★★
★★★★★
Easy install, worked like a charm!
My shop valid working like new again, thank you!
Guest - March 23, 2020
Verified Purchase
★★★★★
★★★★★
Great Price
Fast service, Great parts
Guest - April 15, 2020
Verified Purchase
★★★★★
★★★★★
Toggle switch for Ridgid Shop Vac
The switch fit just as i had hoped it would. It arrived much faster than I expect.
Guest - May 11, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair.
The part was as described. Fit right in and my vacuum works again.
Guest - June 30, 2020
Verified Purchase
★★★★★
★★★★★
Easy Repair
The switch was delivered quickly and safely. Works just like the original switch!
Guest - July 12, 2020
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Remove motor housing cover [6 screws] to access inner cover
2. Remove [4 screws] to access switch
3. Unplug black and red wire from switch and push switch out of top cover
4. Install new toggle switch and connect wires
5. Replace covers in reverse order [rotating housing cover until it sets correctly]
... Read more>6. Done
Read less
Did you find this story helpful?
Thank you for voting!
The on/off switch was broken off so I was unable to use my shop vac.
Removed a couple screws, pulled the switch unit out, detached the old switch, hooked up the replacement switch, replaced the new unit and screwed it back in. It works great.
Pressed on the side tabs of the switch to release it with a small screwdriver. Then removed the terminals from the old switch to the new switch, then pressed the new switch back in.
Made sure vacuum was unplugged before beginning. Took the top of the vacuum off. Removed the four screws underneath holding it together. Pulled motor off shroud. Pulled off two wires to switch. Squeezed tabs to release old switch. Threw it away. Pushed in new switch till it popped into place. Replugged in wires into new switch. Lined up
... Read moremotor to screw holes on top. Screwed it back in. Locked top back onto vacuum container. Plugged it in. Switched it on and vacuumed up my mess. Really straight forward
Read less
Did you find this story helpful?
Thank you for voting!
Brittle plastic switch broke off of the toggle switch.
1. CAUTION; be sure that the power cord to your vacuum is NOT plugged into any power outlet.
2. Using a #2 phillips screwdriver remove the top cover from the vacuum. Remove the wires from the switch, squeeze the clips together on the old switch and push it out of the cover. Press the new switch into the cover and reconnect the w
... Read moreires to it. Reinstall the cover on to the vacuum, plug it into the power outlet and test it.
Removed the old switch and replaced it with the new one.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
