It is a genuine item that is supplied by the original manufacturer for use with Oreck vacuums. The purpose of this part is to work as an adaptor allowing the dust bag to be attached. It is an identical replacement for a damaged or a missing component that was included with a new unit. Check the owner's manual and the diagrams for your specific model for the correct application of this bag doc kit. Note, it is made of durable plastic and is sold as an individual component. Replacing it is a simple task that does not require any special tools.
Troubleshooting
This part works with the following brands:
Oreck
This part works with the following products:
Upright Vacuum
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair.
Vacuum works great!
Kathryn - October 31, 2019
Verified Purchase
★★★★★
★★★★★
an outstanding company to do business with
Exactly the part that I needed easy to install good company
Carmi - April 10, 2020
Verified Purchase
★★★★★
★★★★★
Oreck Vacuum Bag Dock
Found the vacuum bag kept coming off so I looked online for a parts breakdown on E Replacement Parts. Showed the part and could see how it went on. Got the part on time and in great shape.
Guest - November 11, 2020
Verified Purchase
★★★★★
★★★★★
Fixed my problem. It said instructions would be sent with product but there wasn’t any. Figured it out in my own. So glad if your store !!!! Saved me from buying a new vacuum !
Exact perfect.
Guest - March 17, 2024
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The process was easy. Unzipped the outer bag and removed the paper bag. The broken paper bag holder was no longer installed which allowed the vacuumed dirt to enter the cloth bag with no containment to the paper bag, hence the problem. The new plastic holder snapped into place with ease however, opening and closing the new bag holder by
... Read more design (Oreck design) is a little difficult to open to remove and replace the paper bag. I did have to remove the hinged portion of the paper bag holder so the part could be placed around the exit chute of the vacuum but was very easy to remove and put back on. It was a simple task and now works as it should.
Read less
Did you find this story helpful?
Thank you for voting!
Installing the Bag Dock on Commercial ORECK uprights
Commercial ORECK uprights come with a CC type vacuum hole orifice which the bags attach to, just like the consumer XL ORECK uprights do. However, commercial ORECK uprights do not come from the factory with plastic hinged Bag Dock adapter. Instead, the commercial models simply push the paper vacuum bags against the CC orifice and hope th
... Read moree bag doesn\'t fall off later.
Commercial XL ORECK uprights use a Metal C clip that secures the outer bag to the vacuums upright pole instead of the Bag Dock that comes with consumer XL uprights. We are going to replace that METAL C CLIP in our commercial model with the BAG DOCK. If we don\'t remove the C clip then the Bag Dock will not properly fit to the vacuum and we\'ll have a big mess later.
1. Unzip outer bag.
2. Remove paper inner bag.
3. Find the METAL C clip that is securing the outer bag to the CC orifice and remove that Metal C clip.
4. Bag Dock: separate the adapter into two pieces at its hinge point so that we end up with the adapter in two understand pieces.
5. Using the smaller of the two pieces, spread it wide so that it will clip into the CC orifice BEHIND THE RIDGED LIP of the CC orifice, in the same way the METAL C CLIP was behind the ridge. It may feel like you are going to break the adapter but it should be fine. It takes some effort to spread it enough to fit BEHIND the CC orifice plastic ridge.
*This is critical that the Dock adapter is BEHIND the ridge of the CC hole, else the outer bag won\'t be clipped on and properly secured to the pole and you\'ll have dust and dirt debris leaking directly into the outer bag with a big mess later.
6. Attach the 2nd half of the adapter to the hinge.
You are ready to install a bag.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12049145
Manufacturer Part Number: O-097565701
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
