This Original OEM Wood Brushroll Assembly Includes: wood brushroll, red bristles, ball bearings, metal pulley, firm-fitting removable end caps. To keep your Oreck vacuum cleaner working at peak performance it is recommended to replace the Brushroll once a year.
Troubleshooting
This part works with the following brands:
Oreck
This part works with the following products:
Upright Vacuum
★
Customer Part Reviews
?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(10 Reviews)
Click to filter by ratings:
5 stars
8
4 stars
1
3 stars
1
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy fix.
Part arrived in perfect condition and it took less than 10 minutes for my husband to install it. I'm assuming it will hold up well, as it appears to be identical to the original.
Guest - May 3, 2019
Verified Purchase
★★★★★
★★★★★
Easy Repair - Great Price - Lightning Fast Shipping!
We ordered a brush roller for our Oreck XL. Installation was simple and our vacuum now purrs like a kitten and works like it's BRAND NEW!! We're thrilled!!
Guest - May 6, 2019
Verified Purchase
★★★★★
★★★★★
works much better than old brush
brush for vacuum was easily installed
Guest - September 30, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
Part was new. Customer service was very helpful.
Guest - October 9, 2019
Verified Purchase
★★★★★
★★★★★
easy repair
works grate
Frances - July 19, 2022
Verified Purchase
★★★★★
★★★★★
Vacuum replacement
Exactly what I needed.
Guest - October 19, 2022
Verified Purchase
★★★★★
★★★★★
Works like new
Easy repair, the sweeper works like new, parts were easy to find on the web site.
Dale - July 21, 2023
Verified Purchase
★★★★★
★★★★★
Easy repair
Part was delivered in a timely fashion and was an exact fit. Very satisfied.
Guest - December 1, 2023
Verified Purchase
★★★★★
★★★★★
Worked as expected. Shipping delay was worrisome.
Right part, right fit.
Guest - August 25, 2020
Verified Purchase
★★★★★
★★★★★
Roller brush and belts.
Parts fit great. Vacuum works great again.
The problem I have is that I ordered May 18, 2019 and didnt receive my paid for order until June 08, 2019. When the item clearly shows in stock, it should shipped out within 2 or 3 days. Not weeks later.
I have purchased from e-replacement before and do not recall having to wait that long.
Please streamline or I will buy elsewhere.
Guest - June 15, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed 5 screws in the base of the vacuum and removed the base.
2. Removed the belt.
3. Removed the existing beater bar, making note of the orientation of the install.
4. Replaced the beater bar.
5. Replaced the belt. Be careful. I had the belt misaligned on the motor and ended up having to replace the belt
... Read more.
6. Replaced the base and 5 screws.
On the Oreck vacuum cleaner you have to unscrew 4 screws to take the bottom of plate off to reveal the brush and belt locations. Then the belt has to be taken off plus the damaged brush to put in a new one. Replacing the brush wasn\'t difficult, just line up the ends properly but getting the belt back on is very difficult because it is e
... Read morextremely tight. A woman would find this very hard to do because it has to be stretched to some degree and requires a lot of strength to do this.
1. Removed the bottom plate by removing the 6 Phillips screws.
2. Used a screwdriver to remove the small metal axle by prying it out of the slot. Used the old axle in the new wheels and popped it back in place.
3. Removed the old belt by sliding the brush roller out of the slots. Install the new belt and slide the rolle
... Read morer into place.
4. Replace bottom panel with the screws.
5. Turned that baby on and I was cruising the floor looking for stuff!
Removed screws on bottom cover to access brush roller and belt. Easily removed brush roller and drive belt assembly and replaced both with new parts. Followed directions from users manual to proper direction of brush roller.
1)Removed bottom plate of vacuum.
2)Removed drive belt.
3)Removed old brush.
4)Positioned new brush in proper orientation.
5)Installed a new belt while I was at it.
6)Screwed bottom plate ba
... Read moreck on vacuum.
7)Glides and picks up debris much better
Read less
Did you find this story helpful?
Thank you for voting!
The small ball bearing on the belt side of the beater brush failed.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
