Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
12041041-1-M-Kirby-K-1321-Wheel Mounting Screw
Part Location Diagram of K-1321 Kirby Wheel Mounting Screw
See part A-53 in the diagram
( Grid squares measure 1x1 inch )
12041041-1-S-Kirby-K-1321-Wheel Mounting Screw Part Location Diagram of K-1321 Kirby Wheel Mounting Screw

Wheel Mounting Screw K-1321

Manufactured by:
Kirby
ERP Number:
ERP12041041
Part Number:
K-1321
Original Equipment Manufacturer ?
  Works with your model  518!
$5.17
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   518!

Jump to:

Description Troubleshooting Repair Instructions Model Cross Reference

Product Description

?

This wheel mounting screw is an OEM direct from Kirby. The metal screw is used on many vacuums, helping to secure the wheel. This item is sold individually, and a Phillips screwdriver is necessary for making the replacement.

Troubleshooting

This part works with the following brands:
  • Kirby
This part works with the following products:
  • Upright Vacuum

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

1947 Vacuum just wore out .

Donald from Bend, Oregon

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
K-186062, K-1525, K-1321, K-132062
Replaced front wheels , retaining screws rounded out heads. I was able to use Vise Grips to remove old screws. Installed New Wheels and Screws.
Emtor Tray R& R just your hands needed.
Brush Roller Complete , Use Lever to release Drive Belt, Use Lever to Remove Head section from unit.
Slide Brush out of frame with Belt . Slide New Roller and belt into frame. Tabs that hold Brush Roller needed to be opened at one end .( Pliers worked just fine).
Reassemble Head and release Belt Holder.
Test Run and just fine.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12041041
Manufacturer Part Number: K-1321
Brand Model Number Description
Kirby 1CB Upright Vacuum - Omega Vacuum
Kirby 1CR Upright Vacuum - Classic Vacuum
Kirby 1HC Upright Vacuum - Heritage Vacuum
Kirby 1HD Upright Vacuum - Heritage Vacuum
Kirby 2CB Upright Vacuum - Classic III Vacuum
Kirby 2HD Upright Vacuum - Heritage II Vacuum
Kirby 3CB Upright Vacuum - Traditional Vacuum
Kirby 505 Upright Vacuum - Upright
Kirby 508 Upright Vacuum - Upright
Kirby 509 Upright Vacuum - Upright
Kirby 510 Upright Vacuum - Upright
Kirby 511 Upright Vacuum - Upright
Kirby 512 Upright Vacuum - Upright
Kirby 513 Upright Vacuum - Upright
Kirby 514 Upright Vacuum - Upright
Kirby 515 Upright Vacuum - Upright
Kirby 516 Upright Vacuum - Upright
Kirby 517 Upright Vacuum - Upright
Kirby 518 Upright Vacuum - Upright
Kirby 519 Upright Vacuum - Upright
Kirby 560 Upright Vacuum - Upright
Kirby 561 Upright Vacuum - Upright
Kirby 562 Upright Vacuum - Upright
Kirby D50 Upright Vacuum - Two-Speed Vacuum
Kirby D80 Upright Vacuum - Two-Speed Vacuum
Kirby Diamond Upright Vacuum - Vacuum
Kirby G3 Upright Vacuum - Vacuum
Kirby G4 Upright Vacuum - Vacuum
Kirby G5 Upright Vacuum - Vacuum
Kirby G6 Upright Vacuum - Vacuum
Wheel Mounting Screw
$ 5.17
In Stock
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖