Part Location Diagram of E-54104-1 Sanitaire Disturbulator Replacement
See part C13 in the diagram
( Grid squares measure 1x1 inch )

Disturbulator Replacement E-54104-1

Manufactured by:
Sanitaire
ERP Number:
ERP17016362
Part Number:
E-54104-1
Original Equipment Manufacturer ?
  Works with your model  SC689A-1!
$26.07
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(3 rated repairs) ?
  Works with your model   SC689A-1!

Product Description

?

This is an OEM part produced by the original manufacturer. A disturbulator is also known as a brushroll. It features a spiraling row of bristles designed to agitate carpet and fabric fibers, which loosens dirt particles in order to clean thoroughly. This part fits in the main suction head. This five-piece assembly includes one brushroll disturbulator, two Cap Bearings (part # 38138), and two Cap Covers (part # 26059A).

Troubleshooting

This part works with the following brands:
  • Eureka
  • Sanitaire
This part works with the following products:
  • Upright Vacuum
Part# E-54104-1 replaces these:
54104-1, 54104A-1,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Belt was broken. Disturbulator needed replacing

Kevin from MESQUITE, Texas

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
E-30563, E-54104-1
Remove cover-plate from bottom of vacuum. Remove old disturbulator. Place belt onto disturbulator. Put new disturbulator (with attached belt) back into vacuum. Stretch belt over onto pulley. Replace cover-plate.
Did you find this story helpful?
Thank you for voting!

Distributaries broken from normal wear.

Willie from Salinas, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
E-54104-1
Replaced with new item. Recycled old item. Easy process.
Did you find this story helpful?
Thank you for voting!

Beater brush bushings overheating.

Dale from OCALA, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
E-30563, E-54104-1
Removed old brush and bushings.
Installed new brush and bushings.
Tested vacuum and found the new bushings overheated too.
Issue was not corrected...will probably trash the machine due to danger of overheating.
Did you find this story helpful?
Thank you for voting!
  • 1