Part Location Diagram of 753-04402 Husky HSG:START:EASY PUL
See part B32 in the diagram
( Grid squares measure 1x1 inch )

HSG:START:EASY PUL 753-04402

Manufactured by:
Husky
ERP Number:
ERP19282404
Part Number:
753-04402
Original Equipment Manufacturer ?
  Works with your model  TB20CS!
$80.08
Special Order

A Bit Difficult 

15 - 30 mins 

(5 rated repairs) ?
  Works with your model   TB20CS!

Product Description

?

This is an authentic OEM sourced replacement starter housing assembly which is specially produced for use with Troy-Bilt and Yard Man trimmers. This is the starter housing that is used to pull-start the engine, over time some components may wear out and begin to fail eventually requiring replacement. It is a complete assembly which includes a plastic housing, starter pulley, starter spring, the pull rope with a grip and the hardware to secure the assembly.

Troubleshooting

This part works with the following brands:
  • Troy-Bilt
  • Yard Man
This part works with the following products:
  • Trimmer
Part# 753-04402 replaces these:
753-04402,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Starter rope broke, wound up getting whole housing assembly, it was easier.

Darrell from ARDEN, North Carolina

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
753-04402
Tried to replace the starter rope after looking for directions on youtube. Got it done then realized more was broken and worn. Ordered a new housing with the starter rope spring and other stuff already attached. When it arrived I put it on in about 20 minutes only because I had experience with taking it apart and putting it together 5 tim es to try to fix the starter rope.
Did you find this story helpful?
Thank you for voting!

Pull start wouldn\'t retract

Anthony from PERKASIE, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
753-04402
After watching the video, I Removed the original pull start assembly.
Installed the new assembly.
Worked like a charm and a lot cheaper than buying a new trimmer.

Thanks again, you make it a lot easier to resurrect my equipment and appliances.
Did you find this story helpful?
Thank you for voting!

Recoil pulley broke

Tony from La Vista, Nebraska

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-04402
Remove the screws from the starting housing assembly. Then simply screw on the new starter housing assembly.
Did you find this story helpful?
Thank you for voting!

Recoil slots broke on pull starter

Richard from Schuylkill Haven, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
753-04402
Removed the screws from the starter assembly and removed it. Then installed the new starter assembly with the new screws.
Did you find this story helpful?
Thank you for voting!

Spring housing broken, spring was rusted up when pulled it broke the housing.

william from malone, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
753-04402
Replace the old starter housing assembly. Then install the new starter assembly.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19282404
Manufacturer Part Number: 753-04402
Brand Model Number Description
Troy-Bilt TB20CS Trimmer - Trimmer
Troy-Bilt TB20DC Trimmer - Trimmer
Troy-Bilt TB25CS Trimmer - Gas Trimmer
Troy-Bilt TB25ET Trimmer - Gas Trimmer
Troy-Bilt TB70FH Trimmer - Gas Trimmer
Troy-Bilt TB70SS Trimmer - Trimmer
Troy-Bilt TB75SS Trimmer - Trimmer
Troy-Bilt TB90BC Trimmer - Trimmer
Yard Man YM90BC Trimmer - Trimmer