Part Location Diagram of V452000480 Shindaiwa Spring Throttle Lever Return
See part M-11 in the diagram
( Grid squares measure 1x1 inch )

Spring Throttle Lever Return V452000480

Manufactured by:
Shindaiwa
ERP Number:
ERP9246299
Part Number:
V452000480
Original Equipment Manufacturer ?
  Works with your model  LE261!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   LE261!

Troubleshooting

This part works with the following brands:
  • Shindaiwa
  • Echo
This part works with the following products:
  • Trimmer
  • Brush Cutter

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

throttle cable \"stiff\" and would not return to idle.

kenneth from university place, Washington

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Loosen two screws on throttle lever assy, loosen two screws on power head-to-trimmer tube clamp. Twist and slide power head off tube. Coated new grip inside with silicone spray and slide onto tube. Slide power head onto shaft and engage drive shaft, retighten clamp screws. Install new cable and spring. NOTE: found it best to route new cab le and kill wires thru new grip channel before sliding new grip onto shaft! Also clean and lube anything that needs attention during tear-down always makes reassembly much easier.
Did you find this story helpful?
Thank you for voting!

Plastic throttle body broke after 23 years service.

Jennifer from ROUGH AND READY, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
I removed the broken plastic throttle body. I also wanted to replaced worn throttle cable. I replaced the cable and installed the new throttle body and switch. I also wanted to replace the rubber handlebar plug which has been missing for several years.
My 23 year old Shindawia is now back in service and operates like new.
The replacement parts were original equipment parts. They are exactly like the original parts that I replaced. I was so happy to be able to locate them and get my weedeater back in service. Thank you!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9246299
Manufacturer Part Number: V452000480
Brand Model Number Description
Shindaiwa C-25 Brush Cutter - Brushcutter
Shindaiwa C-27 Brush Cutter - Brushcutter
Shindaiwa C260 Brush Cutter - Brushcutter
Shindaiwa C270 Brush Cutter - Brushcutter
Shindaiwa LE260 Edger - Lawn Edger
Shindaiwa LE261 Edger - Lawn Edger
Shindaiwa PB270 Power Broom - Power Broom
Echo RM-4300 Trimmer - Trimmer
Shindaiwa T-25 Trimmer - Trimmer
Shindaiwa T-27 Trimmer - Trimmer
Shindaiwa T260 Trimmer - Trimmer
Shindaiwa T260B Trimmer - Gas Trimmer
Shindaiwa T261 Trimmer - Trimmer
Shindaiwa T261B Trimmer - Trimmer
Shindaiwa T270 Trimmer - Trimmer
Shindaiwa T272X Trimmer - Trimmer