Part Location Diagram of A566000110 Shindaiwa Clutch Spring
See part C-8 in the diagram
Replacing your Shindaiwa Trimmer Clutch Spring
( Grid squares measure 1x1 inch )

Clutch Spring A566000110

Manufactured by:
Shindaiwa
ERP Number:
ERP9195708
Part Number:
A566000110
Original Equipment Manufacturer ?
  Works with your model  PB3410!
$6.20
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   PB3410!

Troubleshooting

This part works with the following brands:
  • Shindaiwa
This part works with the following products:
  • Trimmer
  • Brush Cutter
  • Power Broom

Videos For installing this part.

?
Replacing your Clutch Spring

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Clutch was engaged all the time causing the head to constantly spin and bog motor down

Jimmy from Williamsport, Tennessee

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
A566000110
1. Removed 2 bolts on each side of bottom cover
2. Removed 4 bolts on front cover
3. Unplugged wires to run/stop switch (left coil wire attached no reason to remove coil)
4. Pulled shaft from over the clutch
Did you find this story helpful?
Thank you for voting!
  • 1