This item has been OEM sourced to ensure a high level of quality. The metal chain is intended to be used with chainsaws from Ryobi. Overtime the chain can wear down and can cause issues with the performance of the saw. This chain can be used as a direct replacement of a worn down ten-inch chain. The saw chain is sold as an individual replacement part.
Had replaced the chain with a substitute brand. The drive links cut deep grooves into the drive sprocket. When the bar finally wore out I couldn\'t find the parts available locally to make the repairs
Removed the nut that holds the cover and bar in place. Slightly loosen the chain tension screw. Remove the \"C\" clip and the chain deflector from the drive shaft. Lift the bar and chain off of the housing. Remove the drive sprocket from the shaft. Clean the housing and cover. Install the new drive sprocket on the shaft. Install the chain
... Read more on the bar in the proper direction. (Proper direction is indiated on bar and on housing cover.) Place the bar and chain on the cover stud, with the drive links of the chain in the drive sprocket grooves, and the hole in the bar onto the tensioner tang. Install the chain deflector and \"C\" clip on the drive shaft. Install the cover and the nut onto the housing stud hand tight. Properly tension the chain with the tension adjusting screw. Tighten the nut on the housing stud to secure the bar and cover in place. There is a small hole at the outer end of the bar where the internal chain sprocket in the bar is located. An occasional few drops of oil on both sides will help prolong the life of the bar.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12643716
Manufacturer Part Number: 693814001
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
