Genuine OEM replacement part, this item is sold individually. The 753-04257 Slider is part of the cutting string release system for the Trimmers listed below. If your trimmer is not releasing the cutting line properly check this part for wear and all of the other parts associated with it.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Repaired my old Ryobi 725r trimmer head
I purchased this to fix my trimmer head as I had used too large of trimmer line in it. The slider broke in half and I needed to fix it. This was the part I needed and it worked.
Guest - April 30, 2019
Verified Purchase
★★★★★
★★★★★
Perfect part for the repair
When this slider broke in my Ryobi 725r trimmer head, I wondered if that was the end of this machine's useful life. Glad to find the replacement part still available here on this site. Installed the part, and my trimmer was up and running fine. Good price, good shipping.
Guest - May 22, 2019
Verified Purchase
★★★★★
★★★★★
Exact part
I am very pleased with the parts I ordered. I chose the standard shipping and received everything in less than one week the parts were exact duplicates of the originals. Everything fit and worked perfectly.
Guest - June 11, 2019
Verified Purchase
★★★★★
★★★★★
Older Weedeater parts
Great condition and fast service. It was an old ryobi weedeater and idk if i was going to be able to find the parts
Guest - June 17, 2019
Verified Purchase
★★★★★
★★★★★
easy repair, works great
worked good
David - September 3, 2020
Verified Purchase
★★★★★
★★★★★
worked a expected
Geat condition
Guest - June 28, 2021
Verified Purchase
★★★★★
★★★★★
Easy as 1-2-3
Our weedwacker broke and we only needed 3 pieces to fix it. The parts we needed were easy to find on the website. Thanks ereplacementparts.com, you saved us $$$
Guest - May 31, 2022
Verified Purchase
★★★★★
★★★★★
The part came fast and it fit right in
The part was just like the old part put it in in the Weedwhacker worked great
Guest - September 11, 2023
Verified Purchase
★★★★★
★★★★★
poor component design
This is the 4th time in 20 years I have had to replace this component. Obviously it should have been made using more durable metal. This is the "weak link" in the Ryobi weed trimmer line of products.
Guest - July 30, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed bump head and spool.
2. Remove clip and plastic thrust lever.
3. Replace broken metal spool clutch and missing spring, making sure clutch tabs are engaged properly with springs.
4. Reassemble remaining parts in reverse order.
When I took the head of the string trimmer apart, I realized the slider was bent and a small spring was missing. I had to destroy the e-clip to get it off and out of the way for the slider, so I just made sure I bought one with the order. Once I got the e-clip off, everything went into place just as the diagram shows. String trimmer runs
... Read morelike new. I am stoked that I was able to find these part for replacement.
I took the trimmer head off. Took out the trimmer reel took out the parts that where holding the slider in took the old one out cleaned all the old parts up put the new parts in. Worked perfectly!!
Not to bad ,but the lower retaining lock washer give me a bit of trouble getting it off. Would be a ten minute job if you have the right tool to remove it. Thanks for the video on how to install it. Pete
A few others have put the video on their repair stories. So look at those and it will help you with this repair.
Follow instructions on \'eReplacement\' Repair Video on \'You Tube\'.
My Ryobi 135r Elec. Trimmer is approx. 15yrs old. I have had very few problems with it.
Repair was easy as eatin\' an entire \'Chocolate Cream Pie\', and just as quick.
1. Take string head apart.
2. Remove all old parts. Including the 2 snap rings on shaft.
3. Clean everything that is to be reused.
4. Put 2 small springs in slots in the bottom of head.
5. Install slider.
6. Put bottom snap ring on shaft.
7. Install spring then plunger.
8. Put top snap ring on sh
... Read moreaft.
9. Replace line spool and bump knob.
Trimmer
- MTD String Trimmer Model 41AD725B034 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 753-04257 MTD Slider")
_WW_2.gif "Part Location Diagram of 753-04257 MTD Slider")
