Part Location Diagram of 530016454 Husqvarna Spring Trigger
See part B-6 in the diagram
( Grid squares measure 1x1 inch )

Spring Trigger 530016454

Manufactured by:
Husqvarna
ERP Number:
ERP9004040
Part Number:
530016454
Original Equipment Manufacturer ?
  Works with your model  GC2128C!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(8 rated repairs) ?
  Works with your model   GC2128C!

Product Description

?

This is an OEM part guaranteed to fit Milwaukee power tools. This trigger spring is attached to main trigger. Please note that only trigger spring is included. When disassembling this area, be sure to slowly separate parts in order to prevent springs from being lost when released too quickly. Though they appear similar, a lockout spring is a different part used with the throttle lockout (not present in all models). This part is often purchased with: • Trigger, part # 545066001 • Throttle Lockout, part # 530059804 • Lockout Spring, part # 545045601

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Craftsman
  • RedMax
  • Poulan
This part works with the following products:
  • Trimmer
  • Edger
  • Brush Cutter
Part# 530016454 replaces these:
530016454,

Customer Part Reviews

?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(8 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Throttle cable and trigger spring broke

Joseph from Hopwood, Pennsylvania

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench set
Parts Used:
576139401, 530016454
Removed handle and replaced throttle cable and trigger spring.
Not very difficult to do. After completed, worked like a new one.
Very happy for e-replacement parts, it made it very easy to see
and order the parts needed to complete this job. Very satisfied, Thank you:
Did you find this story helpful?
Thank you for voting!

Edger was dropped and the plastic trigger broke off. Also fracturing the post the trigger swivels on. And i broke the spring while dissasembling the housing.

Daniel from Burleson, Texas

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
574355301, 545223201, 530016454
1. I took apart the housing
2. I reassembled using the new parts
Did you find this story helpful?
Thank you for voting!

broken trottle cable. broken trigger spring and trigger

George from Chapmanville, West Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1. took screws out of trigger holder
2. took screws out of shaft
3. took carburetor cover off
4. disassembled throttle cable and replaced
5. replaced trigger and spring and rerouted in housing and replaced all screws
6. fired that baby up!
Did you find this story helpful?
Thank you for voting!

Throttle cable and trigger spring broke

Joseph from Hopwood, Pennsylvania

2 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
545125301, 530016454
1. Opened cable and spring housing on the handle of weed eater.
2. Removed broken cable and spring inside of cable housing.
3. Replaced with new cable and spring in the handle.
4. Closed housing and hoped what i just did worked :) It worked!
Did you find this story helpful?
Thank you for voting!

Throttle spring rusted and broket

Patrick from Montgomery, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
530016454
The spring broke when I replaced the on/off switch. It was easy to replace.
Did you find this story helpful?
Thank you for voting!

Weed eater throttle spring

jake from elma, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
530016454
Its still in progress. I got the throttle spring fixed but might need to buy a nea carburetor
Did you find this story helpful?
Thank you for voting!

left and right housing throttle and trigger were broken

Allan from CULLMAN, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
545223001, 545223201, 530016454
I took the engine shut off switch out first, and replaced it in the new throttle housing. Next I put the spring trigger on, put the throttle cable in the new trigger, placed the wires in the throttle housing,snapped the housings together and tightened the screws back to the trimmer. Everything works fine now. Thanks
Did you find this story helpful?
Thank you for voting!

Housing was broke. New one was the correct part all fixed

Darrin from CENTERTON, Arkansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
545223001, 545223201, 530016454
Had a bad starter switch in the trimmer
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9004040
Manufacturer Part Number: 530016454
Brand Model Number Description
Husqvarna 122RJ Brush Cutter - 122rj
Husqvarna 124C Trimmer - Husqvarna String Trimmer Model 124C/2006-05 (124C/200605, 124C/2006 05) Parts
Husqvarna 124L Trimmer - Husqvarna String Trimmer Model 124L/2006-05 (124L/200605, 124L/2006 05) Parts
Husqvarna 125C Trimmer - Trimmer
Husqvarna 125C-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125E Edger - Edger
Husqvarna 125E-CANADA Trimmer - Gas Line Trimmer
Husqvarna 125L Trimmer - Trimmer
Husqvarna 125LD Trimmer - 125 Ld, 20061000001-20064900000
Husqvarna 125LDX Trimmer - Husqvarna String Trimmer Model 125LDX Parts
Husqvarna 125LDXTEST Trimmer - 125ldx Test (2010-06)
Husqvarna 125LSST Trimmer - Gas Line Trimmer
Husqvarna 125RJ Brush Cutter - Brushcutter
Husqvarna 128C Trimmer - Trimmer/Edger
Husqvarna 128CD Trimmer - 28cc Gas Line Lawn Trimmer
Husqvarna 128CD-LOWES Trimmer - Gas Line Trimmer
Husqvarna 128DJX Trimmer - Husqvarna String Trimmer Model 128DJX Parts
Husqvarna 128L Trimmer - Husqvarna String Trimmer Model 128L/2008-09 (128L/200809, 128L/2008 09) Parts
Husqvarna 128LD Trimmer - Trimmer/Edger
Husqvarna 128LDX Trimmer - Husqvarna String Trimmer Model 128LDX/2008-12 (128LDX/200812, 128LDX/2008 12) Parts
Husqvarna 128LX Brush Cutter - 128 Lx
Husqvarna 128PS Pole Saw - 128ps
Husqvarna 128RJ Trimmer - Husqvarna String Trimmer Model 128RJ/2009-08 (128RJ/200908, 128RJ/2009 08) Parts
Husqvarna 129C Trimmer - Us Trimmer
Husqvarna 129DJX Trimmer - Us Can
Husqvarna 129L Trimmer - Us Can
Husqvarna 129LDX Trimmer - Us Can
Husqvarna 129LK Trimmer - Us Can
Husqvarna 129RJ Brush Cutter - Row Brushcutter
Husqvarna 325L Edger - 325 L