Part Location Diagram of 638090001 Homelite WASHER
See part C11 in the diagram
( Grid squares measure 1x1 inch )

WASHER 638090001

Manufactured by:
Homelite
ERP Number:
ERP18787422
Part Number:
638090001
Original Equipment Manufacturer ?
  Works with your model  UT15160!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(3 rated repairs) ?
  Works with your model   UT15160!

Product Description

?

It is a genuine item that is supplied by the original manufacturer for use with Ryobi and Homelite handheld string trimmers. This washer-clutch is a special friction disk that helps to engage the clutch by ensuring a tight fit between connected components. It provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams of your model for the exact location and the correct installation of this part. One durable metal washer is included. You may need a screwdriver and a wrench set to perform this repair.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Homelite
  • Ryobi
This part works with the following products:
  • Trimmer
  • Brush Cutter
  • Pole Saw
  • Hedge Trimmer
Part# 638090001 replaces these:
638090001,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Clutch discs broken

Paul from COON VALLEY, Wisconsin

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1. Found the Clutch discs were obsolete. (Homelite bc900 and many other trimmers I found in my research.)
2. I discovered while researching that the clutch parts breakdown used the same clutch washer and the same drum, but it used a different clutch which wasn\'t obsolete. Purchased new clutch, drum, and the two different sized w ashers. Parts were for Ryobi BC30.
3. Removed the clutch drum by loosening captive torx screw in end of drum, sliding off the drum.
4. Removed the clutch each of the two clutch discs by tapping a screwdriver with a hammer to spin then off.
5. Removed old clutch washers.
6. Replaced washers and clutch in order for other model trimmer.
7. Tighten clutch with adjustable plier.
8. Installed new drum.
Did you find this story helpful?
Thank you for voting!

Bad vibration due to broken clutch

Dave from LAKE ORION, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
Remove spark plug and feed small rope into spark plug hole to stop piston from turning over.
Remove T25 screw holding clutch drum to crankshaft
Turn clutch counter clockwise to unscrew from shaft
Replace part in reverse sequence with new parts
Did you find this story helpful?
Thank you for voting!

Clutch was defective

Burt from Supply, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
638090001, 300960002
1. Removed starter pull handle
2. Removed 12 torq screws/bolts
3. Disconnected electrical connectors and throttle cable
4. Removed spark plug
5. Fed rope into cylinder to \"jam\" piston
6. Removed old clutch assembly and washer
7. Installed new washers and clutch assembly
8. Fed starter rope throu gh housing
9. Aligned starter pulley
10. Reinstalled torq screws (8) and bolts (4)
11. Reconnected electrical connectors and throttle cable
12. Installed spark plug
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18787422
Manufacturer Part Number: 638090001
Brand Model Number Description
Homelite 74110 Trimmer - Gas Line Trimmer
Homelite 74121 Trimmer - Gas Line Trimmer
Homelite B25S Trimmer - Trimmer
Homelite BC1725SBR Trimmer - Trimmer
Homelite BC2500AZ Trimmer - Trimmer
Ryobi BC30 Brush Cutter - Brushcutter
Homelite BC3000 Trimmer - Trimmer
Homelite BC730SBR Trimmer - Trimmer
Homelite BC800 Trimmer - Trimmer
Homelite BC900 Trimmer - Trimmer
Homelite BM26SS Trimmer - Bm26ss 26cc String Trimmer Mfg. No. 090330503 7-6-20 (Rev:02)
Homelite BM26SSL3VNM Trimmer - Bm26ssl3vnm 26cc Straight Shaft String Trimmer Mfg. No. 095330553 10-5-20 (Rev:01)
Homelite BM26SSL3VNMC Trimmer - Bm26ssl3vnmc 26cc Straight Shaft String Trimmer Mfg. No. 095330554 10-5-20 (Rev:01)
Homelite BM26SSVNM Trimmer - Bm26ssvnm 26cc String Trimmer Mfg. No. 095330502 7-6-20 (Rev:02)
Homelite BM4CSSAC Trimmer - Bm4cssac 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 090432502 8-11-20 (Rev:04)
Homelite BM4CSSACC Trimmer - Bm4cssacc 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 090432504 8-11-20 (Rev:04)
Homelite BM4CSSACCVNM Trimmer - Bm4cssaccvnm String Trimmer Mfg. No. 095432553 7-6-20 (Rev:03)
Homelite BM4CSSACVNM Trimmer - Bm4cssacvnm 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 095432502 8-11-20 (Rev:04)
Homelite BM4CSSACVNMC Trimmer - Bm4cssacvnmc 30cc 4-Cycle Straight Shaft String Trimmer Mfg. No. 095432554 8-11-20 (Rev:04)
Homelite C1200 Trimmer - Trimmer
Homelite C300 Trimmer - Trimmer
Ryobi CS30 Trimmer - String Trimmer
Homelite D630CD Trimmer - Trimmer
Homelite D730CDV Trimmer - Trimmer
Homelite D825CA Trimmer - Trimmer
Homelite D830CA Trimmer - Trimmer
Homelite D830CB Trimmer - Trimmer
Homelite D830CD Trimmer - Trimmer
Homelite D830SB Trimmer - Trimmer
Homelite D830SBA Trimmer - Trimmer