- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Jump to:
Product Description
?It is a genuine replacement part that is supplied from the original equipment manufacturer for use with Echo backpack blowers. The carburetor's job is to mix fuel and air in a perfect ratio for combustion. To supply the fuel for this mixture, there are many tiny passages inside the carburetor. Any one of these passages can become clogged, causing the engine to run poorly or not at all. It is a high-quality metal body carburetor with a rubber primer bulb and it is sold individually.
Troubleshooting
- Echo
- Trimmer
- Hedge Trimmer
- Edger
- Pole Saw
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
echo edger would not run at the proper RPM\'s
ROBERT from Jerome, Michigan
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
- Parts Used:
- A021000700
2.removed the throttle cable
3. removed the fuel lines
4. removed the screws holding the carburetor to the motor
5. reversed steps 1-4
6. put a fresh mix of 50-1 gas and oil in the tank
7. started motor on second pull and it ran at the proper RPM\'s
Carburetor was non functional.
robert from jerome, Michigan
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
- Parts Used:
- A021000700
Pruner engine would not run.
Donald from Sparta, Tennessee
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
- Parts Used:
- A021000700
2. Install new carburetor
3. Start motor.
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: A021000700
| Brand | Model Number | Description |
|---|---|---|
| Echo | HCA-260 | Hedge Trimmer - Hedge Clipper Articulating |
| Echo | HCA-261 | Hedge Trimmer - Hedge Clipper Articulating |
| Echo | PAS-260 | Trimmer - 24.5 cc Pro Attachment |
| Echo | PAS-261 | Edger - Power Head Straight Shaft Edger Attachment |
| Echo | PE-260 | Edger - Edger |
| Echo | PE-261 | Edger - Edger |
| Echo | PPT-260 | Pole Saw - Power Pruner Telescoping Shaft |
| Echo | SHC-260 | Hedge Trimmer - Shaft Hedge Clipper |
| Echo | SHC-261 | Hedge Trimmer - Hedge Clipper |
| Echo | SRM-260 | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-260S | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-260SB | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-260U | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-261 | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-261S | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-261SB | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-261T | Trimmer - Straight Shaft Trimmer / Brushcutter |
| Echo | SRM-261U | Trimmer - Straight Shaft Trimmer / Brushcutter |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.