Part Location Diagram of P021015650 Echo Control Cable Asy
See part B-13 in the diagram
( Grid squares measure 1x1 inch )

Control Cable Asy P021015650

Manufactured by:
Echo
ERP Number:
ERP9231810
Part Number:
P021015650
Original Equipment Manufacturer ?
  Works with your model  PPF-225!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   PPF-225!

Product Description

?

This is a genuine Echo part which is made for use with handheld trimmers. It is a high-quality replacement for a faulty or a missing control cable assembly that was installed on a new unit. The assembly connects to the switch allowing a user to control the equipment. Refer to the appropriate diagrams and the owner's manual for your model to ensure the correct repair procedure. Note, this high-quality control cable assembly is sold as an individual item. Keep in mind a screwdriver will be needed to take apart and reassemble the housing.

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Trimmer
  • Hedge Trimmer

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Control cable assembly was missing on echo srm225 weed wacker

Charles from Buena, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1. I disassembled the handle and the plastic housing off the trimmer.
2. I connected the cable to the throttle trigger.
3. Routed the cable and two wires through the handle, into the plastic housing around the
engine.
4. I connected the wires for the on/off switch to the appropriate areas.
5 I connected the other side of the cable to the throttle on top of the carburetor.
6. I started the trimmer, made a few adjustments to the carb and cable.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9231810
Manufacturer Part Number: P021015650
Brand Model Number Description
Echo BRD-280 Edger - Edger
Echo PAS-225 Trimmer - Gas Power Source Attachement
Echo PAS-225SB Trimmer - Gas Power Source Attachment
Echo PAS-225VP Trimmer - Gas Power Source Attachment
Echo PAS-225VPB Trimmer - Gas Power Source Attachment
Echo PPF-225 Pole Saw - Power Pruner Fixed Shaft
Echo PPF-235ES Pole Saw - Power Pruner Fixed Shaft
Echo SHC-225 Hedge Trimmer - 21.2cc Hedge Trimmer w/20" Shaft
Echo SHC-225S Hedge Trimmer - Short Shafted Hedge Trimmer
Echo SRM-225 Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-225i Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-225SB Trimmer - Straight Shaft Trimmer / Brushcutter