Part Location Diagram of C050001090 Echo Pipe, Main
See part L-1 in the diagram
Replacing your Echo Trimmer Pipe, Main
( Grid squares measure 1x1 inch )

Pipe, Main C050001090

Manufactured by:
Echo
ERP Number:
ERP9193853
Part Number:
C050001090
Original Equipment Manufacturer ?
  Works with your model  SRM-230!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(13 rated repairs) ?
  Works with your model   SRM-230!

Product Description

?

This main pipe is a genuine replacement part that is sourced from original manufacturer for use with Echo trimmers. This durable metal pipe holds the flexible drive shaft and attaches to the gear box at the lower end of the pipe. Please note the main pipe includes the drive shaft liner, but the flexible drive shaft is sold separately.

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Trimmer

Videos For installing this part.

?
Replacing your Pipe, Main

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(13 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Main pipe was bent

JAY from CORSICANA, Texas

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
C050001090
Disassemble and removal of the pipe was quite easy. Reassemble a little more difficult. Aligning the throttle cable and trigger assembly took a little extra care.
Did you find this story helpful?
Thank you for voting!

The main pipe got run over and bent

Penny from South Bend, Indiana

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
C050001090
Just change it
Did you find this story helpful?
Thank you for voting!

Shaft broke.

Thomas from Albuquerque, New Mexico

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
C050001090
Replaced shaft.
Did you find this story helpful?
Thank you for voting!

Pipe got ran over by my wife =ƒÿä

John from Columbia , Tennessee

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
C050001090
Pull it apart an put new part in
Did you find this story helpful?
Thank you for voting!

main pipe was rubbed thru from hauling on a rack on my trailer

Joel from Ocala, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
C506000390, C050001090
removed the lower head then the handle then loosened the throttle trigger assembly like i said loosened only then loosened the 2 screws at the powerhead slid the pipe out and reinstalled the new one and lined and tightened everything
Did you find this story helpful?
Thank you for voting!

Main pipe that hold the trimmer head.

Donald from Godfrey, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
C050001090
Removed the power {engine} head from the main pipe and removed the trimmer head, after that replaced the new main pipe and the engine and trimmer head. Started engine and check out all parts. Every thing good.
Did you find this story helpful?
Thank you for voting!

Flexible driveshaft broke.

Ron from Springfield, Missouri

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
C506000390, C050001090
Removed appropriate screws.
Exchanged main pipe and shaft.
Replaced screws.
Did you find this story helpful?
Thank you for voting!

Bent the main shaft of my Echo weed eater

Brandon from Athens, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
C050001090
Removed the old shaft from trimmer head and motor
Replaced with the new shaft I purchased from ereplacementparts.com
It fit perfect and my trimmer is good as new!!
Best $40 I have spent in a while and a lot better than paying $300 for a new weed eater

10 out of 10 for ereplacementparts.com

Than ks
Brandon
Did you find this story helpful?
Thank you for voting!

Main pipe was bent and cracked.

Francis from Winchester, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench (Adjustable)
Parts Used:
C050001090
1. Removed old pipe.
2. Removed pipe from head and trigger mechanism.
3. Removed cutting Head.
4. Pulled drive shaft .
5. Install new pipe and reconnect parts in sequence.
Trimmer works like new.
Did you find this story helpful?
Thank you for voting!

No [power to trimming attachment. The flexible drive shaft broke.

Robert from WILLIAMSBURG, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
C050001090
1. Loosen star drive bolts at the base of the drive shaft to remove trimming attachment
2. Pull out drive shaft
3. Lubricate and replace drive shaft.
4. Reattach trimming attachment
5. Use trimmer.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9193853
Manufacturer Part Number: C050001090
Brand Model Number Description
Echo SRM-210 Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-210i Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-210U Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-225 Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-225i Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-230 Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-230U Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-231 Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-231U Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-260U Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-266 Trimmer - Trimmer
Echo SRM-266T Trimmer - Trimmer
Echo SRM-280 Trimmer - Trimmer
Echo SRM-280T Trimmer - Trimmer