This piston ring is an authentic manufacturer approved replacement part. Is is commonly used on Echo gas trimmers/edgers. The purpose of a piston ring is to create an air tight seal inside the cylinder. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase. This would cause low compression and a loss of power. Replacing an o-ring should resolve this issue. This part is made out of metal and is sold individually. To complete this repair you will need a set of wrenches, pliers and a screwdriver. • Remove the air cleaner • Drain the fuel • Remove the air cleaner case • Remove the carburetor • Remove the intake insulator • Remove the spark plug • Remove the engine cover • Remove the insulator gasket • Remove the starter assembly • Remove the fuel tank • Remove the air duct • Separate the engine • Bind the engine • Remove the clutch • Remove the flywheel • Remove the starter pulley • Unbind the engine • Remove the muffler • Separate the cylinder from the crankcase • Remove the piston ring • Install the piston ring • Reassemble and test the equipment
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
perfect fit
fast delivery, correct part, my trimmer runs again.
Guest - May 10, 2019
Verified Purchase
★★★★★
★★★★★
Perfect fit
I broke the original ring trying to remove it. This replacement fit great and was a great price.
Guest - May 20, 2019
Verified Purchase
★★★★★
★★★★★
Loss of power fixed !
Easy to replace. Runs like new.
Mark - December 1, 2020
Verified Purchase
★★★★★
★★★★★
Outrageous delivery fee.
Quick delivery,good price,but delivery fee is outrageous. Could have been put in a snail mail envelope and sent for 51 cts.
Guest - October 12, 2021
Verified Purchase
★★★★★
★★★★★
part is great, shipping and overall experience from ereplacement parts negative
Part worked for what it was, but the first time it was shipped it arrived broken, I called to have it replaced they had to make a new order, charge my card again with shipping, then refund the shipping cost. I ordered it on a Saturday they say that it will ship in one business day.
Wednesday rolls around, still hasn't shipped, we call and the lady said it was shipped Monday. Thursday morning I check the shipping and it still hasn't shipped, ready to call and complain we check again and it just shipped that day. finally get the package on Friday.
Not that it will make a difference but I will NEVER order from them again because with the original order, I ordered on Sunday before Labor Day and it shipped on Monday (Labor Day) we received it on Wednesday. I thought I found my new supplier but definitely not.
Kerrey - September 18, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed all engine cover screws with an allen wrench.
2. Removed fuel tank,and carburetor to be cleaned.
3. Removed cylinder head from piston and crank shaft housing.
4. Removed engine block from trimmer shaft.
5. Separated crank case and removed locked up rear crank bearing.
6. Replaced bearing and oil s
... Read moreeal made a new gasket and seated the crankcase. Covered all parts with 2 cycle oil, just enough to ensure no burnout.
7. Removed piston rings, cleaned the piston and installed new rings.
8. Reinstalled piston into cylinder head making sure the rings were seated at proper alignment, with new head gasket. Making sure cylinder was oiled and not scarred up.
9. Reinstalled carb, gas tank and shaft in reverse order.
10. Fired her up and let run 30mins, torqued bolts. Runs like brand new..!
1. Removed the piston but broke a ring
2.Ordered a pair of rings and head gasket, used a brake cyl hone tool wrapped with 1500 grit paper for a light polish job.( BY Hand ). Applied a heavy coat of white grease. The the Rings have and piston has match notches to index the rings .The head slide on the piston very smooth
took engine apart
placed new rings on piston
greased cylinder wall, piston and rings
slipped piston with rings into cylinder
put all bolts and screws back where they belong
have not started yet
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(290323__Up)_WW_2.gif "Part Location Diagram of A101000000 Echo Piston Ring")
_(290323__Up)_WW_2.gif "Part Location Diagram of A101000000 Echo Piston Ring")
