Part Location Diagram of 12311440630 Shindaiwa Throttle Cable Bracket Screw
See part F-6 in the diagram
( Grid squares measure 1x1 inch )

Throttle Cable Bracket Screw 12311440630

Manufactured by:
Shindaiwa
ERP Number:
ERP8856763
Part Number:
12311440630
Original Equipment Manufacturer ?
  Works with your model  AHS242!
$7.96
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   AHS242!

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
This part works with the following products:
  • Trimmer
  • Leaf Blower / Vacuum
  • Hedge Trimmer
  • Edger
  • Pole Saw
  • Auger
  • Brush Cutter
  • Multi-Tool
  • Power Broom
  • Engine
Part# 12311440630 replaces these:
12311440630,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replaced the carburetor and throttle cable Echo Backpack blower

Neal from FALLS CHURCH, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
12311440630
Removed the carburetor. (Two screws behind the air filter and remove throttle cable)
Bought a complete carburetor with a manifold gasket.
Replaced the gasket and installed the new carburetor.
Dismantled the throttle handle assembly (3 screws)
Removed the old throttle cable. (Had to pull it out of the plastic condu it on the arm)
Installed the new cable, feeding it back through the soft plastic conduit. (easy)
Reassembled the throttle housing.
Attached cable to the carburetor and tightened the lock nuts.(original position)
Blower started right up on the 2nd pull.
No adjustment needed to the Hi/Low fuel screws or the carburetor throttle cable.
Runs like new!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8856763
Manufacturer Part Number: 12311440630
Brand Model Number Description
Shindaiwa 22C Brush Cutter - Brushcutter
Shindaiwa 22DH Hedge Trimmer - Hedge Trimmer
Shindaiwa 22F Trimmer - Trimmer
Shindaiwa 61480 Trimmer - Trimmer
Shindaiwa 80192 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 80280 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 80613 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 81017 Trimmer - Trimmer
Shindaiwa 81088 Trimmer - Multi-Tool
Shindaiwa 81742 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa 89026 Trimmer - Trimmer
Shindaiwa AH230 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AH231 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AH242 Hedge Trimmer - Hedge Trimmer
Shindaiwa AH2510 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AH262 Hedge Trimmer - Articulated Hedge Trimmers (Ah)
Shindaiwa AHS231 Hedge Trimmer - Hedge Trimmer
Shindaiwa AHS242 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AHS2510 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa AHS262 Hedge Trimmer - Articulated Hedge Trimmers (Ahs)
Echo BRD-2620 Edger - Edgers Bed Redefiners (Brd)
Echo BRD-280 Edger - Edger
Shindaiwa C230 Brush Cutter - Brushcutter
Shindaiwa C242 Brush Cutter - Brushcutter
Shindaiwa C2510 Brush Cutter - Brushcutter
Shindaiwa C262 Brush Cutter - Brushcutters (C)
Shindaiwa C282 Brush Cutter - Brushcutter
Shindaiwa C302 Brush Cutter - Brushcutters (C)
Shindaiwa C344 Brush Cutter - Brushcutter
Echo CLS-5000 Trimmer - Trimmer - Straight Shaft Clearing Saw