Part Location Diagram of 90125Y Echo Tune-up Kit
See part O-803 in the diagram
( Grid squares measure 1x1 inch )

Tune-up Kit 90125Y

Manufactured by:
Echo
ERP Number:
ERP11826150
Part Number:
90125Y
Original Equipment Manufacturer ?
  Works with your model  PAS-266!
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  Works with your model   PAS-266!

Product Description

?

Equipment that is not properly maintained is much more likely to break down pre-maturely. Prolong the life of your equipment by performing these simple maintenance tasks all packaged in one convenient kit. This kit includes: Fuel filter Air filer Pre-filter Spark plug

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Trimmer
  • Pole Saw
  • Hedge Trimmer
  • Edger

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bar and chain damage and time for tune up

Anthony from Fort Sam Houston , Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
90125Y, 12A0CD3744C, 91VXL44CQ
1. Removed old bar and chain
2. Cleaned up old oil and saw dust
3. Applied new chain to bar in correct direction
4. Set bar in place keeping chain properly set in bar and around sprocket
5. Applied cover and tightened cover screw while supporting bar upwards and keeping chain taught
5. Adjusted chain tens ioner to proper tension and tightened two bar nuts to proper torque
6. Verified proper chain tension and free rotation around bar.
7. Tune up kit per provided instructions (spark plug, air filter, and fuel filter. Check gap on plugGǪit was perfect.
Did you find this story helpful?
Thank you for voting!

Only would start and stay running on starting fluid

JASON from BERLIN, New Hampshire

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
90125Y, P003001121
I\'m a seasoned mechanic 25 years not counting all the pedal bike and lawn mower repairs.
The carb was plugged from old gas, no use of stabilizer and emptying the tank (Previous owners fault). Plug was fouled. I bought the tune up kit for the fuel filter, spark plug and air filter. I knew the carb was gummed up so I got a rebuild k it for that. Rebuilt the carb, changed the tune up kit parts and bam it\'s back to starting easy, idling and operates fine. Remember use gasoline stabilizer!
Did you find this story helpful?
Thank you for voting!

Tune up.

Patricia from BURSON, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Parts Used:
90125Y
1. Removed the old spark plug and installed the new spark plug.
2. Removed the old fuel filter and replaced with the new one.
3. Had to drain the old fuel.
4. Removed the old filter and install the new one.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11826150
Manufacturer Part Number: 90125Y
Brand Model Number Description
Echo 90125 Multi-Tool - Repower Maintenance Kits - Repower Tune-Up Kitb
Echo HCA-266 Hedge Trimmer - Articulating Hedge Trimmer
Echo PAS-266 Trimmer - Gas Power Source Attachement
Echo PAS-280 Trimmer - Pro Attachement Series
Echo PE-266 Edger - 25.4 cc Edger
Echo PE-266S Edger - 25.4 cc Edger
Echo PPF-280 Pole Saw - Power Pruner
Echo PPT-266 Pole Saw - Power Pruner
Echo PPT-266H Pole Saw - Power Pruner
Echo SHC-266 Hedge Trimmer - Short Shafted Hedge Trimmer
Echo SRM-266 Trimmer - Trimmer
Echo SRM-266S Trimmer - Steel Drive Shaft Trimmer
Echo SRM-266T Trimmer - High Torque Trimmer
Echo SRM-266U Trimmer - Straight Shaft Trimmer / Brushcutter
Echo SRM-280 Trimmer - Trimmer