Genuine OEM replacement part used on Black and Decker String Trimmers. This part is made out of Plastic and it is Sold Individually. This part helps to direct grass trimmings away from the user as well as provide protection from the cutting string while unit is in operation. To attach the Guard follow simple steps. • Turn the trimmer upside down so that you are looking down at the spool cap. • Turn the guard upside down and slide it onto the motor housing. Make sure the tabs on the guard engage the ribs on the motor housing. • Continue to slide the guard on until you hear it "snap" into place. • Using a Phillips Screwdriver, insert the guard screw to complete the guard assembly.
For a Black n Decker cordless weed trimmer. The hood cover (guard assembly) over my cord reel was cracked and had to be replaced. The cap cover over the cord reel was completely worn out and had to be replaced. The hood only required a screwdriver and removing a couple of screws then pulling the old cracked cover off. Installing the new h
... Read moreood was as easy as sounding into position and then securing it with the screws. These inexpensive parts were easy to replace and saved me from purchasing a new weed trimmer.
Removed broken guard, using flathead screwdriver to push down on tabs. Then snapped on the new guards. The Black & Decker one had a screw as well as snap-in tabs.
1) Used Phillips head screwdriver and loosened screw holding guard on trimmer
2) Removed broken guard
3) Slid new guard in trimmer
4) Installed new supplied screw to secure guard
Did you find this story helpful?
Thank you for voting!
Grass guard was cracked and the line cover was worn out.
Removed line cover, reel, and spring from under the cover.
Removed one screw holding the guard in place.
Used wire brush to clean dirt from motor housing.
Removed old guard and replaced with the new one using the new screw (provided).
Installed reel, threaded line, installed spring on new cover and installed new co
... Read morever.
Read less
Did you find this story helpful?
Thank you for voting!
Guard assembly had split so that it was no longer automatically trimming the string
1. Had to loosen the screw.
2. Had to use some WD40 to free the screw.
3. Once the screw was out the old guard slipped right out.
4. Slipped the new one in and replaced the screw with the new one.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/lawn-and-garden/trimmer/caps-and-lids/"},{"position":2,"name":"90560170N","title":"90560170N","url":""}]
