( Grid squares measure 1x1 inch )

Spool Kit 90540850

Manufactured by:: DeWALT
ERP Number:: ERP18988231
Part Number:: 90540850

Works with your model GL1000-AR!

$19.61

★★★★★

37 Reviews

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(56 rated repairs) ?

Works with your model GL1000-AR!

Jump to:

Description Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

This is a genuine Black and Decker replacement part, it is sold individually. It includes the Outer Housing with two Eyelets and Cap and Lever. This Converts The Type 1 To The Type 2 Head) The Type 1 Outer Spool Is No Longer Available.

Troubleshooting

This part works with the following brands:

Black and Decker

This part works with the following products:

Trimmer

Part# 90540850 replaces these:

90540850,

★

Customer Part Reviews

4.1

Average Rating (out of 5):

★★★★★

(37 Reviews)

Click to filter by ratings:

5 stars

24
4 stars

4
3 stars

2
2 stars

3
1 star

4

< Prev
1
2
3
Next >

Sort by:

★★★★★

Worked just right.

I own a Black & Decker Grasshog XP GH5000 Type 5. Which Everybody including B&D says that it doesn't exist so I ordered the one for Type 4 and it fitted exactly. Except for the spool but otherwise I'm very satisfied for your help and prompt delivery of the parts. Thank you very much!

Guest - May 4, 2019

Verified Purchase

★★★★★

Fixed the Trimmer the Easy Way

The part was easy to find and it worked out great. Thank You!

Guest - May 25, 2019

Verified Purchase

★★★★★

Great. Worked as expected.

Arrived in good condition. Great service.

Guest - June 11, 2019

Verified Purchase

★★★★★

Needed Part That Works

The part worked exactly as expected.

Guest - July 15, 2019

Verified Purchase

★★★★★

Just what was needed!

The replacement part worked fine with my old equipment. It might be good to sell the orange part separately from the black part, only because it seems that the orange part is the one most susceptible to breakage.

Guest - August 15, 2019

Verified Purchase

★★★★★

Perfect fit

This replacement part fit my weed eater perfectly. Came super fast.

Guest - September 24, 2019

Verified Purchase

★★★★★

Easy

Perfect fit. Everything works great

Guest - October 25, 2019

Verified Purchase

★★★★★

Just what I needed - Easy installation

Arrived in reasonable time and installation was easy.

Guest - November 4, 2020

Verified Purchase

★★★★★

edger repair part

perfect condition - works great - saved money

Guest - June 7, 2021

Verified Purchase

★★★★★

Fast delivery

My weed eater guard was easy to replace;however, the best part was how fast the part arrived.

Guest - July 8, 2021

Verified Purchase

< Prev
1
2
3
Next >

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

< Prev
1
Next >

Sort by:

I know my item has been discontinued, but would this cap fit my model? Thanks.

Jo For model number GH1000 - March 8, 2022

Hi Jo, Thank you for your question. The cover is sold with the spool kit. The part number listed under your model number for the spool kit is 90540850. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team

March 8, 2022

Did this question help you?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(56 rated repairs) ?

< Prev
1
2
3
Next >

Sort by:

My Trimmer was not working properly.

LARRY from TULSA , Oklahoma

58 of 58 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 90540850, DF-080

I took off the Outer Housing and Cap I ordered a new (Upgrade Kit. Outer Housing, Eyelets, Lever). After I removed the phillips head screw, it took some strength to pull off the old housing, I also used a flat head screw driver to assist.
Once off after trying to place the new outer housing on several times, I couldn\'t get it to ... Read more

Read less

Did you find this story helpful?

Replacement of upgraded housing

Jeff from Palmdale, California

26 of 26 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers
Parts Used:: 90540850

Tabs on original cap broke off. New cap didn\'t fit housing. Bought complete set. ( to remove housing you need to unscrew then place two flat head screwdrivers on opposite sides of housing where it meets the metal, insert screwdrivers downward towards control arm then slowly pry upwards simultaneously until housing is disengaged.

Did you find this story helpful?

Outer Housing Replaced

RICHARD from Placerville, CA., California

22 of 22 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 90540850

The ratcheting arm inside my old unit broke. The arm was sold with outer housing only. The new housing was a very tight fit to shaft, but I was able to tap it on with a mallet. Works fine now. Rich

Did you find this story helpful?

Broken cap that holds spool in

dale from port richey, Florida

10 of 10 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 90540850

Removed the cap by pressing on the side tabs. Removed the spool. Then I removed the screw holding the outer housing on. Installed the new housing, place the spool inside of it. Then lined up the tabs to the inserts of the outer housing and just snapped it in very easy.

Did you find this story helpful?

Trimmer string was continually feeding using an entire spool within a few minutes

Shirley from Sellersville, Pennsylvania

9 of 9 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 90540850

I went online and saw that 85% of the time a new trimmer head was the solution. The head contains a new string feed arm, solving the issue. The trimmer went back into use and was 100% fixed.

Did you find this story helpful?

One of the two tabs on the cap that fits over the outer housing broke off.

Linda from Altamonte Springs , Florida

5 of 5 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 90540850

First I removed the spool with the cutting line in it. Then removed the screw holding the old outer housing on and removed it. Then I screwed the new outer cap on. Installed the spool and pressed the new cap on.

Did you find this story helpful?

String on trimmer came out to quickly

Richard from Gwinn, Michigan

4 of 4 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers
Parts Used:: 90540850, 90529876, DF-080

Removed and replaced spool housing and all is good.

Did you find this story helpful?

Plastic guard was broken off and needed new housing as old cover kept coming off.

Ronald from Fort Myers, Florida

4 of 4 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 90540850, 478536-00

Removed the two screws from the old guard and removed it. I then removed the two screws holding the line cutting blade from the old guard and installed it on the new guard. Then I used the two screws to install the new guard on the trimmer. I then removed the old cover and spool. Then remove the screw holding the old outer housing to the ... Read more

Read less

Did you find this story helpful?

Outer Housing Broke

Philip from Berkley, Michigan

3 of 3 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 90540850, 371954-01

\"E\" replacements is wonderful, and I will use again. Poor design by Black and Decker. Should have been a bolt off bolt on replacement. The bolt supplied was the same size as the original on. 3/4\" is not long enough. The housing came off on first use, and flew across the lawn. At the end of the bolt, the last threads were damage ... Read more

Read less

Did you find this story helpful?

Weed trimmer fed out line too fast. replaced the head.

Bruce from Overland Park, Kansas

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers
Parts Used:: 90540850

Replaced head. Installed string spool. Unit seemed to work find and dispensed trimmer line as it was supposed to.

Did you find this story helpful?

< Prev
1
2
3
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP18988231
Manufacturer Part Number: 90540850

Brand	Model Number	Description
Black and Decker	GH1000	Trimmer - 14" String Trimmer
Black and Decker	GH1000-AR	Trimmer - 900w Grass Trimmer/Edger
Black and Decker	GH1000-B2	Trimmer - 900w Grass Trimmer/Edger
Black and Decker	GH1000-B2C	Trimmer - 900w Grass Trimmer/Edger
Black and Decker	GH1000-B3LZ	Trimmer - String Trimmer - Fob Inte
Black and Decker	GH1000-BR	Trimmer - 900w Grass Trimmer/Edger
Black and Decker	GH1100	Trimmer - Grass String Trimer
Black and Decker	GH1100-B2C	Trimmer - 1000 Watts String Trimmer
Black and Decker	GH1100-B3LZ	Trimmer - 1000 Watts String Trimmer
Black and Decker	GH2000	Trimmer - Trimmer
Black and Decker	GH2000LW	Brush Cutter - 14 Grass Hog
Black and Decker	GL1000-AR	Trimmer - 900w String Trimmer