This replacement switch is a high quality item that is specially manufactured for Black and Decker and Dewalt handheld lawn and garden equipment. Switches are a commonly replaced part which controls on/off function of the power tool. Over time mechanical components tend to wear out and begin to fail eventually requiring replacement. This durable plastic switch is sold individually, to replace it you will need a screwdriver.
Troubleshooting
This part works with the following brands:
Black and Decker
Craftsman
This part works with the following products:
Trimmer
Part# 90552860 replaces these:
90552860, P90552860,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair for B&D leaf blower
Order this as it looked exactly like the switch in my B&D leaf blower. It fit and works perfectly.
Guest - September 24, 2019
Verified Purchase
★★★★★
★★★★★
Works again
Fast shipping! Part was a direct replacement and was an easy install.
Will use E again.
Guest - May 31, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the screws holding the two halves of the handle/trigger housing. Pry halves apart, noting how trigger, trigger lock, and springs fit in the housing. Unplug the two wires on the switch mechanism (needle nose pliers will help), remove old switch, plug wires into the new switch, drop the new switch back over the two pins that secure
... Read more it and then put the two halves of the housing back together ( this is the most difficult part-lining up the trigger, springs, etc. Have patience and don\'t force anything. It will go together easily when properly aligned. TIP: when starting the screws that hold the housing together, turn counterclockwise until you feel it start, then clockwise to tighten. Otherwise the screw may cross thread in the plastic and fail to tighten or crack open the screw hole.
Read less
Did you find this story helpful?
Thank you for voting!
Black & Decker 20V Lithium Hand Vacuum -Power Switch broke uses same as other B&D yard tools
I did not complete my repair. After replacing the starter the weed wacker still did not start and is not yet functioning. I think I have given up trying to repair the thing.
The male connectors on the new switch I received has wider connectors than the original connectors on my existing switch on the tool. In order for me to use the new switch I would have to change the female connectors on my tool to be able to make connection.
Did you find this story helpful?
Thank you for voting!
This was actually for an obsolete leaf blower. The switch would not shut off.
1. Removed Battery.
2. Removed all housing screws with a screw gun.
3. Disconnected old switch from wires.
4. Replaced identical switch by reconnecting wires.
4. Replaced housing screws with a screw gun.
5. Replaced battery.
Very simple.
Remove the screws from the housing and carefully separate. Make note how the switch is positioned along with both of the springs. Remove the leads from the old switch and connect them to the new switch. Remove the springs, then carefully install them. Then screw the housing back together.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
