Part Location Diagram of 736-04310 Husky WASHER-FLAT 1.015
See part F-53 in the diagram
( Grid squares measure 1x1 inch )

WASHER-FLAT 1.015 736-04310

Manufactured by:
Husky
ERP Number:
ERP19273155
Part Number:
736-04310
Original Equipment Manufacturer ?
  Works with your model  5000!
$6.16
Special Order

A Bit Difficult 

More than 2 hours 

(1 rated repair) ?
  Works with your model   5000!

Product Description

?

This spacer is an OEM direct from the Troy-Bilt manufacturer. The metal spacer has been designed for use with many roto tillers, and works as a seal between the bushing and the wheel shaft. This part is sold individually. A wrench may be helpful in making this replacement.

Troubleshooting

This part works with the following brands:
  • Troy-Bilt
This part works with the following products:
  • Tiller
Part# 736-04310 replaces these:
1132-2, 736-04310, GW-1132-2,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

More than 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

tine shaft needed replacing cuz it had a zillion hours of tilling and shaft seals wore a groove and leaked fluid

Andrew from Hamilton, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
941-04300, 736-04310
removed tines,cover,belts ,pulleys oil covers,snap rings,bearing washers then had to pound out shaft,bronze bushings and washer were victims of pounding out shaft.this is the procedure in troy bilt manual
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19273155
Manufacturer Part Number: 736-04310
Brand Model Number Description
Troy-Bilt 0360 Tiller - Horse-Silver Anniversary(8hp) Tiller
Troy-Bilt 10056 Tiller - Horse Iii
Troy-Bilt 12055 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12056 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12057 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12058 Tiller - PTO Horse Roto Tiller
Troy-Bilt 12059 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12060 Tiller - (0100101-Up) 3HP Roto-Tiller
Troy-Bilt 120603HP Tiller - 12060 3hp Roto-Tiller (S/N 0012160-Up)
Troy-Bilt 12061 Tiller - 3hp Roto-Tiller
Troy-Bilt 120613HP Tiller - 12061 3hp Roto-Tiller (S/N 120610100101-Up)
Troy-Bilt 12064 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12065 Tiller - Tiller
Troy-Bilt 12068 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12069 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12070 Tiller - Roto Tiller Power Composter
Troy-Bilt 12071 Tiller - PTO Horse Tiller
Troy-Bilt 12074 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12075 Tiller - Horse Tiller
Troy-Bilt 12077 Tiller - 3hp Roto-Tiller
Troy-Bilt 120773HP Tiller - 12077 3hp Roto-Tiller (S/N 120770100101-Up)
Troy-Bilt 12080 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12081 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12082 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12083 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12087 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12087C Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12088 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12088C Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12089 Tiller - (0100101) Rear-Tine Horse Tiller