Part Location Diagram of 732-04778 MTD Spring-compression
See part L-32 in the diagram
( Grid squares measure 1x1 inch )

Spring-compression 732-04778

Manufactured by:
MTD
ERP Number:
ERP10006091
Part Number:
732-04778
Original Equipment Manufacturer ?
  Works with your model  24729932!
$6.36
Special Order
Minimum Quantity of 2 required

Difficult 

More than 2 hours 

(1 rated repair) ?
  Works with your model   24729932!

Troubleshooting

This part works with the following brands:
  • Cub Cadet
  • MTD
  • Craftsman
  • Troy-Bilt
This part works with the following products:
  • Tiller
Part# 732-04778 replaces these:
732-04778, 732-04778-CM,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Difficult 

More than 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Tiller would shift gears on a craftman rear tiller

David from PEARLAND, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
741-0862, 732-04778
had to take all off, down to the frame
split frame (a few tricks to make job easier )
clean and polish axels
pull of shaft seals (make job much easier, I did it the hard way)
cleaned out gear casing
polished gears
cleaned off seals
replaced parts
put back together
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10006091
Manufacturer Part Number: 732-04778
Brand Model Number Description
Troy-Bilt 1172763 Tiller - 1172763 - Tillers Brushcutters And Pruners
MTD 21AB452A004 Tiller - Mtd Gold Tiller
MTD 21AB452A059 Tiller - MasterCut Tiller Model 21AB452A059/2011 Parts
MTD 21AB454E299 Tiller - MTD Tiller Model 21AB454E299 Parts
Cub Cadet 21AB455C Tiller - Cub Cadet Tiller Model 21AB455C/2014 Parts
Cub Cadet 21AB455C010 Tiller - Cub Cadet Tiller Model 21AB455C010 Parts
Cub Cadet 21AB455C709 Tiller - Cub Cadet Tiller Model 21AB455C709/2011 Parts
Cub Cadet 21AB455C710 Tiller - 21ab455c710 Rt 65h (2016) Rt 65h 21ab455c710 (2016)
MTD 21AB455C897 Tiller - MTD Tiller Model 21AB455C897/2011 Parts
Cub Cadet 21AB456A Tiller - Cub Cadet Tiller Model 21AB456A/2014 Parts
Cub Cadet 21AB456A709 Tiller - 21ab456a709 Rt 65 (2018)
MTD 21AB45M5004 Tiller - Mtd Gold Tiller
Cub Cadet 21AB45M5010 Tiller - Cub Cadet Tiller Model 21AB45M5010/2011 Parts
Cub Cadet 21AB45M5056 Tiller - Cub Cadet Tiller Model 21AB45M5056/2011 Parts
MTD 21AB45M5059 Tiller - MasterCut Tiller Model 21AB45M5059 Parts
MTD 21AB45M5083 Tiller - MTD Tiller Model 21AB45M5083 Parts
Cub Cadet 21AB45M6010 Tiller - Cub Cadet Tiller Model 21AB45M6010 Parts
Cub Cadet 21AB45M8 Tiller - Cub Cadet Tiller Model 21AB45M8/2014 Parts
MTD 21AB45M8704 Tiller - Mtd Gold 450 Series Tiller
Cub Cadet 21AB45M8710 Tiller - 21ab45m8710 Rt 65 (2018)
Cub Cadet 21AB45M8756 Tiller - 21ab45m8756 Rt 65 (2018)
MTD 21AB45M8759 Tiller - MasterCut Tiller Model 21AB45M8759 Parts
MTD 21AB45M8783 Tiller - MTD Tiller Model 21AB45M8783 Parts
Cub Cadet 21AB45M9 Tiller - Cub Cadet Tiller Model 21AB45M9/2014 Parts
Cub Cadet 21AB45M9710 Tiller - Cub Cadet Tiller Model 21AB45M9710/2012 Parts
MTD 21AB47M6099 Tiller - MTD Tiller Model 21AB47M6099 Parts
Craftsman 24723000 Tiller - Tiller
Craftsman 24729932 Tiller - Tiller
Craftsman 247299320 Tiller - Rear Tiller
Craftsman 247299321 Tiller - 450 Series Tiller