Part Location Diagram of 80900054701 Ryobi ASSEMBLY SWITCH

See part A79 in the diagram

ASSEMBLY SWITCH 80900054701

Manufactured by:: Ryobi
ERP Number:: ERP18701310
Part Number:: 80900054701

Works with your model BT3100-1!

$11.91

Easy

Less than 15 mins

(2 rated repairs) ?

Works with your model BT3100-1!

Jump to:

Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:

Ryobi

This part works with the following products:

Table Saw

Part# 80900054701 replaces these:

080900054701,

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(2 rated repairs) ?

< Prev
1
Next >

Sort by:

Switch was broken, saw wouldn\'t shut off.

Daniel from Poughkeepsie, New York

6 of 6 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 80900054701

Removed four phillips head screws, pulled out switch, wrote down where the wires go, removed the wires, put the wires on new switch, inserted new switch and replace screws

Did you find this story helpful?

Bench saw adjustment handle and safety switch

Martin from Biglerville, Pennsylvania

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 80900054701, A182014001

Removed blade adjustment handle with Allen wrench.(Note - do not loose the spring) Installed new handle. Using a Phillips screwdriver, remove old safety switch (Note - make sure unit is unplugged). Label the location of the wires. Remove the old wires and then connect the new switch. Remount the switch to bench saw\'s frame.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP18701310
Manufacturer Part Number: 80900054701

Brand	Model Number	Description
Ryobi	BT3100-1	Table Saw - 10" Table Saw