Part Location Diagram of 682504-0 Makita Cord Guard 10-85
See part 40 in the diagram
( Grid squares measure 1x1 inch )

Cord Guard 10-85 682504-0

Manufactured by:
Makita
ERP Number:
ERP10153920
Part Number:
682504-0
Original Equipment Manufacturer ?
  Works with your model  DP4700!
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(4 rated repairs) ?
  Works with your model   DP4700!

Product Description

?

This rubber piece is a genuine Makita manufactured part. It is manufactured for various power tools. A cord protector guards the wires from damage caused by motion and strain. Damaged cords must be replaced to avoid safety hazards. A replacement cord is sold separately. This item consists of one (1) cord protector. This is a simple and quick repair. • Unplug machine • Remove the casing • Detach cord from tool • Slide cord protector onto cord • Reattach wires and casing • Test power tool

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Table Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Power cord dry rot

Roger from Chino Valley, Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
682504-0, 664463-0
1. Removed the switch housing
2. Removed the old cord and guard
3. Trimmed ends on new cord
4. Installed the cord through the new cord guard
5. Installed the new cord in the switch.
6. Tested router worked fine
Did you find this story helpful?
Thank you for voting!

Old power cord was dry rotted and had shorted out

John from Stuart, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
682504-0, 664463-0
Removed 2 Philips head screws to expose electrical junction box. Next I loosened 2 terminal connector screws inside junction box and removed the old cord. Attached new cord into the terminal connectors and tightened! Replaced junction box cover screws. This old Makita router was made in 1993 so the cord had seen better days! Works like a champ now!
Did you find this story helpful?
Thank you for voting!

Bad cord

Herbert from Williamstown, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
682504-0, 664213-3
Remove old one and replaced with new one
Did you find this story helpful?
Thank you for voting!

Cracked cord, cracked cord guard.

Robert from Entiat, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
682504-0, 664463-0
Removed screws from switch cover, removed cord clamp, made note where the cord wires were connected. Disconnected cord. Slid new cord guard on new cord, then connected cord. Then installed cord and cord clamp. Replaced the switch cover.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10153920
Manufacturer Part Number: 682504-0
Brand Model Number Description
Makita 1900BW Planer Jointer - 3-1/4 Inch Planer
Makita 2702 Table Saw - Table Saw
Makita 2703 Table Saw - Table Saw
Makita 2703X1 Table Saw - 15A 10" Table Saw
Makita 2704 Table Saw - Table Saw
Makita 2704X1 Table Saw - 10" Table Saw
Makita 2705 Table Saw - 10 in. Contractor Table Saw
Makita 2705X1 Table Saw - 10" Contractor Table Saw with Stand
Makita 3612B Router - Router
Makita 3612BR Router - Router
Makita 3612BRA Router - Router
Makita 3702B Laminate Trimmer - Laminate Trimmer
Makita 406 Upright Vacuum - Vacuum
Makita 4200H Circular Saw - Circular Saw
Makita 4200NH Circular Saw - Circular Saw
Makita 5012B Chainsaw - Chainsaw
Makita 5800BR Saw - Saw
Makita 6010BVR Drill - Drill
Makita 8410B Hammer - Hammer Drill
Makita 8410BV Hammer - Hammer Drill
Makita DP4700 Electric Drill - 1/2&#34 Electric Drill