Part Location Diagram of JT9-HF2-112 Jet CURSOR

See part A-12 in the diagram

CURSOR JT9-HF2-112

Manufactured by:: Jet
ERP Number:: ERP19149245
Part Number:: JT9-HF2-112

Works with your model JWSS-10CS!

$27.01

Easy

Less than 15 mins

(3 rated repairs) ?

Works with your model JWSS-10CS!

Jump to:

Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:

This part works with the following products:

Table Saw
Miscellaneous

Part# JT9-HF2-112 replaces these:

HF2-112,

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(3 rated repairs) ?

< Prev
1
Next >

Sort by:

Cursor broke from removing the saw fence repeatedly

Israel from Atlanta, Georgia

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: JT9-HF2-112

Remove and replace. Hard part was finding a suitable replacement (it\'s considered obsolete) until I went to a wood store and saw the cursor being used on another manufactures machine.

Did you find this story helpful?

Cursor was so old it became to cloudy and useless

Jimmy from King George, Virginia

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: JT9-HF2-112

simply screwed in on my guide rail

Did you find this story helpful?

Tape was worn and unreadable in some areas, index plastic marker was scratched and cloudy

Dale from Santee, California

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: JT9-XF2-207A, JT9-HF2-112

1. Removed the scratched cursor by taking out two screws
2. Carefully removed the scale with putty knife
3. Cleaned glue residue off of the fence tube with alcohol
4. Installed new scale
5. Installed new cursor

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP19149245
Manufacturer Part Number: JT9-HF2-112

Brand	Model Number	Description
Jet	708928Z	Miscellaneous - Jet 708928z Parts
Jet	JWSS-10CS	Table Saw - Super Saw