Check to make sure that the table saw is unplugged from the power source. Facing the table saw as if you were going to cut wood, remove the left hand side panel (4 screws). Follow the power cord back to the power switch and remove the phillips head screws which hold the black plastic protective cover in place. Using needle nosed pliers
... Read more, remove the wires from the defective switch one at a time and tag them for location. Remove the defective switch from the housing and install the new one by snapping it in place. Replace the wires one at a time, making sure they are placed according to the tagged location. Replace black plastic protective cover, plug in power cord, and check saw for proper operation.
The belt and the lock knob were purchased as spare parts.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19138113
Manufacturer Part Number: JT9-708315-9
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-708315-9 Jet BELT")
_WW_1.gif "Part Location Diagram of JT9-708315-9 Jet BELT")
