Part Location Diagram of A26493S Delta Cam Foot Assembly
See part 510 in the diagram
( Grid squares measure 1x1 inch )

Cam Foot Assembly A26493S

Manufactured by:
Delta
ERP Number:
ERP10330830
Part Number:
A26493S
Original Equipment Manufacturer ?
On Order

Easy 

Less than 15 mins 

(8 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine part which is supplied by the original manufacturer for use with Delta and Biesemeyer saws. It is an identical replacement for a damaged or a missing cam foot assembly that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact location and the correct repair procedure. Keep in mind it is sold as an individual item. A wrench set might be needed to replace this cam foot assembly.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Delta
  • Biesemeyer
This part works with the following products:
  • Table Saw
  • Table Saw Accessories

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
  • 5 stars
    6
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(8 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fence would move during use

Charles from Needville, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
A26493S
Replaced old cam foot assembly. Perfect fit!
Did you find this story helpful?
Thank you for voting!

Bismayer fence would no longer lock .

Carl from Kapaa, Hawaii

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
A26493S
1 remove screw
2 replace cam plate
3 re-attach screw
4 realize that that did not make any difference..apparently they did a small change in material thickness as the new cam plate was as thin as the old one without its pressure plate.
Did you find this story helpful?
Thank you for voting!

1/16GÇ¥ wider than the original Biesemeyer cam foot

Edward from WEST POINT, Mississippi

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
A26493S
The original part was 1/16GÇ¥ narrower than the new cam foot. My first attempt to place it chipped two small places on the face of the friction plate. This gripes my intelligence on replacing this important part. For my Biesemeyer fence system!

I used a small pry bar to pressure the opening to place the Cam Foot and allow pro per alignment of the replacement part.
Did you find this story helpful?
Thank you for voting!

nothing, just like originan (except not worn)

Robert from PORTALES, New Mexico

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
A26493S
removed the old one, replace with the new
Did you find this story helpful?
Thank you for voting!

Worn cam foot would not lock fence.

Kenneth from Mason City, Iowa

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
A26493S
Replaced cam foot .
Did you find this story helpful?
Thank you for voting!

Original Cam foot Assembly wore out

Eric from ANNANDALE, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
A26493S
Very easy repair. Removed the upper nut and bolt holding original cam foot assembly in place on my Biesemeyer fence. Then re-inserted bolt through new cam foot assembly and tightened down nut. Done! Only needed two 7/16\" wrenches.
Did you find this story helpful?
Thank you for voting!

Old CAM wore out aftere about 20 years

Stephen from Orem, Utah

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
A26493S
Removed one bolt that holds the CAM in place and removed old CAM and installed new. Piece of cake!
Did you find this story helpful?
Thank you for voting!

Nylon pad had fallen off and I could not find it. Used nylon washers in the mean time.

Alan from Waxhaw, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
A26493S
Removed old cam and replaced it with new one. Very simple.
Did you find this story helpful?
Thank you for voting!
  • 1