1. Pulled plunger out of sprayer.
2. Replaced rubber components on bottom of plunger and tube.
3. Had to use a flat blade screw driver to help put on the new rubber seal on to bottom of the
plunger part.
Only wish the kit contained the rubber seal that goes around top, that the handle rod goes up an
... Read mored down through.
But after 20 plus years of use, I guess I canGÇÖt complain too much. It works like new again.
1. Remove lid and replace seal.
2. Remove cap for pump assembly.
3. Pull out handle and replace seal on the end of pump handle.
4. Remove and replace check valve on the bottom of pump housing.
5. Replace o-ring at the top of the pump housing.
6. Reinstall pump assembly into sprayer.
1. removed old plunger gasket
2. made a taper-tool the size of the retaining collar
3. placed the new gasket on the taper-tool
4. aligned the taper-tool with the retaining collar and pressed the new gasket past the retaining collar
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8940410
Manufacturer Part Number: 285320
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/sprayer/seals-and-gaskets/"},{"position":2,"name":"285320","title":"285320","url":""}]
