Part Location Diagram of 243222 Graco Tranducer
See part B-86 in the diagram
( Grid squares measure 1x1 inch )

Tranducer 243222

Manufactured by:
Graco
ERP Number:
ERP10161376
Part Number:
243222
Original Equipment Manufacturer ?
  Works with your model  795!
$211.88
Special Order

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   795!

Product Description

?

It is an authentic item that is supplied by the original equipment manufacturer for use with Graco sprayers. The transducer is designed to detect the pressure in order to prevent over pressurization, unfortunately, over time it will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality component is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

Troubleshooting

This part works with the following brands:
  • Graco
This part works with the following products:
  • Sprayer
  • Paint Sprayer
  • Miscellaneous

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Sprayer would build pressure, but not start pumping after starting to spray

ronald from ford city, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
243222
Replaced the transducer
Did you find this story helpful?
Thank you for voting!

Not pumping

ANDREW from LOMETA, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
258964, 243222
1.Removed screws.
2.To control panel and back cover.
3.Removed circuit board and replaced with new.
4.Exact way it was removed.
5.Plugging in two wires that were in the back cover area.
6.Then replaced transducer unscrewing and screwing the other one in.
7. Put everything back together.
Did you find this story helpful?
Thank you for voting!
  • 1