OEM Pflueger Baitcast Reels Parts – eReplacementParts.com

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 1116237

The yoke spring attaches to the yoke and is made of metal. This is a genuine Abu Garcia and Pflueger replacement part that is sourced from the original manufacturer for use with fishing reels. This part is available individually, even though two may be needed. When replacing this spring a screwdriver and a set of pliers might be required during the installation process. It will require replacing i...

Washer

★★★★★

(3)

$6.22

Minimum Quantity of 2 required

Manufacturer Part Number:: 1125736

This part is sourced from the original manufacturer and is used with baitcast reels that are made by Abu Garcia and Pflueger. The washer is part of the level wind assembly and is used to provide compression between the pawl and the line guide nut. A flathead screwdriver and a small pick may be needed to install this washer. Priced as a single item.

Line Guide Nut

★★★★★

(1)

$6.16

Manufacturer Part Number:: 1129323

This authentic manufacturer-supplied part is specially designed for use with Abu Garcia and Pflueger fishing reels. It is a special hardware that helps to secure the line guide. It provides an identical replacement for a missing or a damaged component that was installed on a new unit. One durable line guide nut is included. A screwdriver will be needed to perform this repair. Make sure to refer to...

Retainer, L.s. Bearing

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 1104790

This is a genuine OEM sourced part is which is specially designed for use with Abu Garcia and Pflueger fishing reels. The ring helps to secure components on a shaft. Over time it may wear out or get damaged eventually requiring a replacement. It is made of durable metal and is sold individually. Make sure to check the appropriate diagram for your specific model to ensure the exact location and the...

Kick Lever Spring

★★★★★

(1)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 1125745

The kick lever spring connects to the kick lever. It is made of metal and is sold individually. This part is an OEM sourced directly from the manufacturer for fishing reels made by Abu Garcia and Pflueger. This is a very small part that will need to be replaced if it gets lost or if it breaks. A screwdriver, a set of pliers, a wrench set, and a nutdriver may all be needed when replacing this part.

Rubber Washer

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 1125771

The washer helps to distribute the pressure evenly to ensure a tight seal between connected components. Over time it will wear out and it may begin to crack eventually requiring a replacement. This authentic manufacturer-sourced part is specially designed for use with Abu Garcia and Pflueger fishing reels.Please make sure to refer to the appropriate diagrams for your model for the exact location a...

Worm Shaft

★★★★★

(3)

$19.92

Manufacturer Part Number:: 1125805

This worm shaft is a genuine replacement part supplied directly from the manufacturer. It is frequently used in Abu Garcia fishing reels. Using this worm shaft on a fishing reel will allow the operator to crank the reel's handle at a comfortable speed while the worm gear decreases the action. This makes it possible for small reels to handle large fish. This part performs best when kept clean and w...

Pawl

★★★★★

(13)

$6.63

Manufacturer Part Number:: 1125806

Genuine Abu Garcia replacement part, this item is sold individually. The 1125806 Pawl is one part of the mechanism on the reel that guides the line back on to the spool. Its purpose is to keep the line from tangling on the spool. It insures that a flat and smooth spool of line will be ready for your next cast

Friction Washer

★★★★★

(4)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 1125770

This friction washer is an OEM direct from Abu Garcia. Compatible with Ambassadeur Fishing Reels, the compound material washer is made to balance the pressure and create a seal for the components in the spool. A screwdriver and a nut driver are often required for making the replacement. The friction washer is sold individually.

Bail Spring

★★★★★

(7)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 1200850

This item has been OEM sourced to ensure a high-level of quality. The metal bail spring is intended to be used with spinning reels from Shakespear and Pflueger. The bail spring fits within the rotor cover and is used to return the trip plunger to snap the bail wire back over the rotor. This item is available as an individual replacement part.

Wormshaft Gear

★★★★★

(3)

$6.16

Manufacturer Part Number:: 1125732

This is an authentic OEM part. The wormshaft gear is compatible with Abu Garcia Ambassadeur Fishing Reels. This plastic gear is fitted between the wormshaft and the wormshaft pin, assisting the worm shaft in maintaining a comfortable speed, even when handling large fish. The wormshaft gear is sold individually, and a screwdriver is needed for the repair.

One Way Clutch

★★★★★

(5)

$8.44

Manufacturer Part Number:: 1200803

It is a genuine item that is supplied by the original manufacturer for Shakespeare and Pflueger fishing reels. The one way clutch is an important mechanism that helps to engage the spool. Over time components may wear out or get damaged, causing the clutch to begin to fail and eventually requiring a replacement. Note, this high-quality item is sold individually. A screwdriver will be needed to tak...

Pflueger Baitcast Reels Parts

Top Pflueger Baitcast Reels Models

Popular Pflueger Baitcast Reels Parts

Pflueger Baitcast Reels Models

Pflueger Baitcast Reels Parts

Search By Model or Part Number

Top Pflueger Baitcast Reels Models

Popular Pflueger Baitcast Reels Parts

Pflueger Baitcast Reels Models