Part Location Diagram of 106HS Shimano ROLLER CLUTCH RING
See part 5705 in the diagram

ROLLER CLUTCH RING 106HS

Manufactured by:
Shimano
ERP Number:
ERP19491658
Part Number:
106HS
Original Equipment Manufacturer ?
  Works with your model  ULTCI45500XSC!
$6.16
Special Order

A Bit Difficult 

More than 2 hours 

(1 rated repair) ?
  Works with your model   ULTCI45500XSC!

Troubleshooting

This part works with the following brands:
  • Shimano
This part works with the following products:
  • Spinning Reels
Part# 106HS replaces these:
RD5705,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

More than 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Shimano Ultegra Scott 10000 overhaul

Rob from Toms River, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
Saltwater did a number on my reel over the last fall surf fishing run. I did a complete tear down of every part and replaced anything that was necessary

The hardest spring to get in place is the anti reverse spring, IGÇÖm not sure if some special tool would have helped but eventually I was able to get it in place with a pai r of needle nose and keep the cam switch locked in place with tape so it wouldnGÇÖt move while I adjusted the spring in place.

Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19491658
Manufacturer Part Number: 106HS
Brand Model Number Description
Shimano SP-14000FA Spinning Reels - Spheros Spinning Reel
Shimano SP-14000FB Spinning Reels - Spheros Spinning Reel
Shimano SP-18000FB Spinning Reels - Spheros Spinning Reel
Shimano SP12000FA Spinning Reels - Spheros Spinning Reel
Shimano SPM14000XTC Conventional Reels - Speedmaster Xtc Reel
Shimano SRG-14000F Spinning Reels - Saragosa Spinning Reel
Shimano SRG-18000F Spinning Reels - Saragosa Spinning Reel
Shimano TU-12000F Spinning Reels - Thunnus Saltwater Spinning Reel
Shimano TU-6000F Spinning Reels - Thunnus Saltwater Spinning Reel
Shimano TU16000F Spinning Reels - Thunnus Saltwater Spinning Reel
Shimano ULT14000XTD Spinning Reels - Ultegra Xtd Spinning Reel
Shimano ULT5500XTC Spinning Reels - Ultegra Xtd Spinning Reel
Shimano ULT5500XTD Spinning Reels - Ultegra Xtd Spinning Reel
Shimano ULTCI414000XTC Spinning Reels - Ultegra Ci4 Spinning Reel
Shimano ULTCI45500XSC Spinning Reels - Ultegra Ci4 Spinning Reel
Shimano ULTCI45500XTC Spinning Reels - Ultegra Ci4 Spinning Reel
Shimano ULTSPODXTD Spinning Reels - Ultegra Xtd Spinning Reel