Part Location Diagram of 10PFH Shimano Line Roller Bushing
See part 10184 in the diagram
( Grid squares measure 1x1 inch )

Line Roller Bushing 10PFH

Manufactured by:
Shimano
ERP Number:
ERP18254567
Part Number:
10PFH
Original Equipment Manufacturer ?
  Works with your model  SH3000FD!
$5.95
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(9 rated repairs) ?
  Works with your model   SH3000FD!

Product Description

?

Line roller bushing provides a tight fit between connected parts while allowing for movement with minimum friction. It is an authentic Shimano component which is specially designed for use with fishing reels. If the original item is damaged or is missing, this will provide an identical replacement. This line roller bushing is made of high-quality material and is sold as an individual item. Check the diagram for your model to ensure the correct replacement procedure.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Shimano
This part works with the following products:
  • Spinning Reels

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Ginding sound when reeling line

Darrell from Corpus Christi, Texas

9 of 9 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
10PFH, 10KM5, 10KFD, 10GAQ, 1079U, 104VX
After going some time with a scratchy/grindy sound/feel when reeling narrowed it down to line roller. Didn\'t do it unless spooling line, oil didn\'t fix, so ordered all the line roller assembly parts(there are several). Loosened screw holding assembly together, carefully separated bail, paying close attention to the order parts were line d up(also had schematic drawing). Popped out the shaped washer pressed in bail arm recess with knife tip and installed new. Pressed bearing, and roller bushing, and roller together, gave a drop of oil. Then while holding screw in place, slid parts on in proper order(important), made sure ears on nut part were in slots, and reassembled. Fairly straight forward process, although my sausage fingers didn\'t help with those itty bitty parts.
Did you find this story helpful?
Thank you for voting!

Shimano stradic ci4+ reel making noise after fishing extensively in saltwater

Nils from Pittsburgh, Pennsylvania

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
10PFH, 10KM5, 10KFD, 10GAQ, 104VX
Removed the line roller parts and replaced with new parts. The reel now works like new. WonÆt be using it in saltwater ever again...
Did you find this story helpful?
Thank you for voting!

Line roller was frozen

David from JOHNS ISLAND, South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
10PFH, 10KM5, 10KFD, 10GAQ, 107WY, 104VX
1. Removed old line roller and associated parts.
2. Installed new line roller and associated parts.
3. Made sure new line roller was working.
Did you find this story helpful?
Thank you for voting!

Line roller ball bearing succumbed to salt water

gene from Gulf Breeze, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
RD10314, 10PFH, 10G8P, 107WY
Remove and replace rotating parts.
Did you find this story helpful?
Thank you for voting!

Reel made noise when reeling line in.

Paul from Brandon , Mississippi

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
10PFH, 10KM5, 104VX
Removed old parts and replaced with new part I ordered based on parts diagrams of the reel. The repair was fairly simple and only require a screw driver to disassemble and reassemble.
Did you find this story helpful?
Thank you for voting!

Roller guide was bad.

Jonathan from Brazil, Indiana

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
10PFH, 10KM5
Ordered replacement roller guide and bearing. Replaced existing with new and reel is as good as new.
Did you find this story helpful?
Thank you for voting!

Bearing noisy.

Richard from SOMERSET, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
RD10314, 10PFH, 10KM5, 10KFD
Replaced all bearing components, although only the bearing was needed. Works smooth now.
Did you find this story helpful?
Thank you for voting!

Bail screw got loose and several small parts were lost

Lyndal from DAUPHIN ISLAND, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
10PFH, 10KUN, 10KFE, 10CZD
Placed ordered parts on bail screw according to diagram and tightened screw.
Did you find this story helpful?
Thank you for voting!

The line roller bearing was rusted

Lawrence from SEBASTIAN, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
10PFH, 10KM5, 10KFD, 10G8P
I removed all of the line roller parts and replaced them with the new parts.
Did you find this story helpful?
Thank you for voting!
  • 1